Tool Life and Wear Mechanism when Machining Hastelloy C-22HS

Tool Life and Wear Mechanism when Machining Hastelloy C-22HS

This paper describes the wear mechanism and tool life when machining Hastelloy C-22HS with coated carbide. The experiment was conducted using four different cutting tool materials under wet condition – namely, Physical Vapor Deposition (PVD) coated with TiAlN; TiN/TiCN/TiN; Chemical Vapor Deposition...

Descripció completa

Dades bibliogràfiques
Autors principals:	K., Kadirgama, M. M., Noor, K. V., Sharma
Format:	Article
Idioma:	English
Publicat:	Elsevier 2011
Matèries:	TJ Mechanical engineering and machinery
Accés en línia:	http://umpir.ump.edu.my/id/eprint/2230/1/fkm-2014-kumaran-tool_life_and_wear_abs_only.pdf

Ítems similars

Aspects of Wear Mechanisms of Carbide Tools when Machine Hastelloy C-22HS
per: K., Kadirgama, et al.
Publicat: (2010)

Finite Element Analysis of Hastelloy C-22HS in End Milling
per: K., Kadirgama, et al.
Publicat: (2011)

Cutting Force prediction model by FEA and RSM when machining Hastelloy C-2HS with 900 holder
per: K., Kadirgama, et al.
Publicat: (2008)

Response surface design model to predict surface roughness when machining hastelloy C-2000 using uncoated carbide insert
per: Nurul Hidayah, Razak, et al.
Publicat: (2012)

Cutting Force And Chip Formation In End Milling Operation When Machining Nickel-Based Superalloy, Hastelloy C-2000
per: N. H., Razak, et al.
Publicat: (2017)

Experimental study on surface integrity in end milling of hastelloy c-2000 superalloy
per: Norhaida, Ab Razak, et al.
Publicat: (2014)

Experiment study on surface integrity in end milling of hastelloy C-2000 superalloy
per: Norhaida, Ab Razak, et al.
Publicat: (2013)

Wear Analysis When Machining AISI 304 with Ethylene Glycol/TIO2 Nanoparticle-based Coolant
per: Yogeswaran, Muthusamy, et al.
Publicat: (2016)

Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material
per: K., Kadirgama, et al.
Publicat: (2010)

Machining characteristics of hastelloy c-2000 in end milling using artificial intelligence approach
per: Nurul Hidayah, Razak
Publicat: (2012)

Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material
per: K., Kadirgama
Publicat: (2009)

Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy
per: M. M., Noor, et al.
Publicat: (2010)

Modelling Of Tool Life When Milling Nickel Base Alloys With Two Different Coated Carbide Insert.
per: K., Kadirgama
Publicat: (2008)

Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach
per: M. M., Rahman, et al.
Publicat: (2011)

Prediction of Tool Life by Statistic Method in End-milling Operation
per: K., Kadirgama, et al.
Publicat: (2008)

Effect of dry machining on tool wear
per: Madihah, Zubir
Publicat: (2012)

Prediction of Grinding Machinability when Grind P20 Tool Steel Using Water Based Zno Nano-Coolant
per: K., Kadirgama, et al.
Publicat: (2014)

Wear of CBN tools in ultra-precision machining of STAVAX
per: X. Ding, et al.
Publicat: (2002)

Experimental Investigation of Minimum Quantity Lubrication on Tool Wear in Aluminum Alloy 6061-T6 using Different Cutting Tools
per: M., Puvanesan, et al.
Publicat: (2014)

Optimised Tool Life by Partial Swarm Optimisation
per: K., Kadirgama, et al.
Publicat: (2010)

Optimization on wear performance of anti wear additive added biolubricant
per: Mas Ayu, Hassan, et al.
Publicat: (2018)

Effect of chip formation on tool wear in machining of titanium
per: Lee, Ka Hung
Publicat: (2010)

Tool Life Analysis By Partial Swarm Optimisation
per: M. M., Noor, et al.
Publicat: (2009)

Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy
per: Jawaid, A., et al.
Publicat: (2000)

Monitoring of tool wear and surface roughness in end-milling for intelligent machining
per: Sarhan, A.A.D., et al.
Publicat: (2011)

The Effect of End Milling Parameters on Surface Roughness when Machining Corrosion Resistance Alloy
per: M. M., Noor, et al.
Publicat: (2009)

Wear behavior of PVD and CVD coated carbide tools when face milling Inconel 718
per: Jawaid, A., et al.
Publicat: (2000)

Tool failure modes and wear mechanism of coated carbide tools when drilling Ti-6AI-4V
per: Rahim, E. A., et al.
Publicat: (2007)

Tool Wear Measurement Using Machine Vision.
per: Ratnam, Mani Maran
Publicat: (2008)

Development of Temperature Statistical Model when Machining of Aerospace Alloy Materials
per: K., Kadirgama, et al.
Publicat: (2012)

Wear Mechanism of Coated and Uncoated Carbide Cutting Tool in Machining Process
per: J. A., Ghani, et al.
Publicat: (2016)

The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045
per: Amiril Sahab, Abdul Sani, et al.
Publicat: (2019)

Wear testing analysis on cylinder head valve for CNG fueled engine
per: N. W., Awang, et al.
Publicat: (2018)

Electrode Wear Rate of Graphite Electrodes during Electrical Discharge Machining Processes on Titanium Alloy Ti-5Al-2.5Sn
per: Khan, Md. Ashikur Rahman, et al.
Publicat: (2014)

Predicting of tool wear on machining parameters using design of experiment (DOE) methodology
per: Faizal Zamri, Zainal Abidin
Publicat: (2007)

End-mill carbide tool wear in machining metallic biomaterial
per: A. I., Yahaya, et al.
Publicat: (2023)

Development of 1st and 2nd order tool life model when machining modified AISI P20 tool steel
per: Afiq Zainorul, Zainal
Publicat: (2009)

An experimental study to evaluate the flank wear interaction with process parameters during machining of aluminium alloy under minimum quantity lubrication with TiO2 nanofluid
per: M. S., Najiha, et al.
Publicat: (2019)

Copper (II) Oxide Nanoparticle As Friction Reduction and Anti-Wear Additive In Lubricating Oil
per: H. M., Asnida, et al.
Publicat: (2016)

Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools
per: Mohd Hafizu, Zakaria
Publicat: (2019)