Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application

Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application

Efficient and effective lubricants have great application prospects in the manufacturing industries. Minimum quantity lubrication (MQL) machining with low flow rate of nanolubricants is investigated for cooling and lubrication during the process. This paper investigates the characterization of graph...

Descrizione completa

Dettagli Bibliografici
Autori principali:	Syh Kai, Lim, Wan Hamzah, Azmi, Ahmad Shahir, Jamaludin, Ahmad Razlan, Yusoff
Natura:	Articolo
Lingua:	English
Pubblicazione:	MDPI 2022
Soggetti:	TS Manufactures
Accesso online:	http://umpir.ump.edu.my/id/eprint/36675/1/11%20Lim%20et%20al.%202022%20Lubricants.pdf

Documenti analoghi

Effects of Hybrid Nanocooling-Lubricants MQCL on Machining Temperature and Tool Wear Mechanisms under Turning Process of Titanium Alloy
di: Lim, Syh Kai, et al.
Pubblicazione: (2023)

Refining the composition of recycled spent lubricants mixed with alumina nanofluids for machining purpose
di: Lim, Syh Kai, et al.
Pubblicazione: (2020)

Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316
di: Ahmad Shahir, Jamaludin, et al.
Pubblicazione: (2018)

Bold approach in finite element simulation on minimum quantity lubrication effect during machining
di: Ainur Munira, Rosli, et al.
Pubblicazione: (2019)

Experimental Investigation on Newtonian Behaviour and Viscosity of TiO2/PVE Nanolubricants for Application in Refrigeration System
di: Mohd Farid, Ismail, et al.
Pubblicazione: (2022)

Chatter detection on thin wall machining of alluminum alloy under MQL condition
di: Amirul Syafiq, Ibrahim
Pubblicazione: (2016)

Current and future challenges of hybrid electrochemical-mechanical machining process for micro- and nano-manufacturing
di: Ahmad Shahir, Jamaludin, et al.
Pubblicazione: (2024)

Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045
di: Amiril Sahab, Abdul Sani, et al.
Pubblicazione: (2019)

Mini review of carbon based additive in machining lubricant
di: K., Jun Li, et al.
Pubblicazione: (2020)

Recent Study on Hard to Machine Material – Micromilling process
di: Ainur Munira, Rosli, et al.
Pubblicazione: (2021)

Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming
di: Lim, Syh Kai
Pubblicazione: (2018)

Kurtosis quantification of different minimal quantity lubrication effects in machining cast iron with coated and uncoated tool
di: N., Jamil, et al.
Pubblicazione: (2018)

A Review on Automotive Tires Significant Characteristic Identification for General Consumers
di: Ahmad Noor Syukri, Zainal Abidin, et al.
Pubblicazione: (2022)

Surface texturing potential on carbide insert in reducing aluminium alloy adhesiveness during machining
di: Chia, Yun Qi, et al.
Pubblicazione: (2019)

Tool Wear Observation During Unconventional Low Speed Machining Using Low Cost Micromilling
di: Ainur Munira, Rosli, et al.
Pubblicazione: (2021)

Experimental Validation for Hot Stamping Process by Using Taguchi Method
di: Mohd Fawzi, Zamri, et al.
Pubblicazione: (2016)

Study of tool wear progression using nano-hybrid Cryogenic MQL in milling titanium alloy
di: Nurul Dayana, Mohd Noor, et al.
Pubblicazione: (2023)

Application of minimum quantity lubrication for various machining processes - A mini review
di: N. E. H., Zamiruddin, et al.
Pubblicazione: (2020)

The stability of TiO2/POE nanolubricant for automotive air-conditioning system of hybrid electric vehicles
di: A. H, Hamisa, et al.
Pubblicazione: (2020)

The analysis of grid independence study in continuous disperse of MQL delivery system
di: Z., Zulkifli, et al.
Pubblicazione: (2023)

Rapid Direct Continuous Method for Hot Embossing of Glass Microlens Array Combined with CO2 Laser Irradiation and External Preheating/Cooling
di: Syarifah Nur Hasanah, Syed Kamarudin, et al.
Pubblicazione: (2021)

Hybrid CNC–MXene nanolubricant for tribological application: Characterization, prediction, and optimization of thermophysical properties evaluation
di: Sakinah, Muhamad Hisham, et al.
Pubblicazione: (2024)

Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining
di: Abd Rahim, Erween, et al.
Pubblicazione: (2018)

The characteristics of hybrid Al2O3:SiO2 nanofluids in cooling plate of PEMFC
di: Muhammad Syafiq, Idris, et al.
Pubblicazione: (2021)

Comparison on cooling efficiency of cooling pad materials for evaporative cooling system
di: Radhiyah, Abd Aziz, et al.
Pubblicazione: (2018)

Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process
di: Firdaus Shazriq, Mohd Fadzil, et al.
Pubblicazione: (2018)

Effects of grouser movement to sand-grouser interaction on unconsolidated soft sand incline using discrete element method (DEM) simulation
di: Siti Suhaila, Sabarudin, et al.
Pubblicazione: (2019)

Physical properties of new formulation of hybrid nanofluid-based Minimum Quantity Lubrication (MQL) from modified jatropha oil as metalworking fluid
di: Ainaa Mardhiah, Sabri, et al.
Pubblicazione: (2023)

Performance evaluation of different types of cutting fluid in the machining of aisi 01 hardened steel using pulsed jet minimal quantity lubrication system
di: Hamdan, A., et al.
Pubblicazione: (2011)

High precision estimation on physical behavior for cutting with various tool rake angle by finite element method
di: Ahmad Shahir, Jamaludin, et al.
Pubblicazione: (2018)

Study of an optimal surface property of carbide cutting tool by surface modification method
di: Razali, Mohd Nizar Mhd, et al.
Pubblicazione: (2019)

Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic
di: Dambatta, Yusuf S., et al.
Pubblicazione: (2018)

Experimental of Hot Machining for Stainless Steel 316L Cutting Process
di: Cholis, N., et al.
Pubblicazione: (2024)

In-situ worn geometry effect over the surface roughness propagation during micro milling process
di: Nurul Farhana, Mohadzir, et al.
Pubblicazione: (2020)

Taguchi method approach on effect of lubrication condition on surface roughness in milling operation
di: Mohamad Syahmi, Shahrom
Pubblicazione: (2012)

Effect of mig and tig welding on hybrid structure using modal analysis
di: Ilmanfaiq, Hamzah
Pubblicazione: (2013)

Modelling of fuzzy inference system for micro milling - a preliminary study through FEM
di: Ainur Munira, Rosli, et al.
Pubblicazione: (2018)

Effects of minimum quantity lubrication technique in different machining
di: Urmi, W. T., et al.
Pubblicazione: (2022)

Sustainable machining process calculator
di: A. R., Yusoff, et al.
Pubblicazione: (2018)

A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium
di: Siti Nur Sakinah, Jamaludin
Pubblicazione: (2015)