PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD LAMINATED WITH THERMALLY COMPRESSED VENEER

PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD LAMINATED WITH THERMALLY COMPRESSED VENEER

The aim of this study was to investigate the effects of thermally compressed veneer laminating on some of the physical and mechanical properties of particleboard. Oriental beech (Fagus orientalis Lipsky) veneers were compressed under various press conditions. Commercially produced particleboard samp...

Full description

Bibliographic Details
Main Author:	Ümit Büyüksarı
Format:	Article
Language:	English
Published:	North Carolina State University 2012-01-01
Series:	BioResources
Subjects:	Particleboard Lamination Thermal compression Thickness swelling Water absorption Modulus of elasticity Bending strength
Online Access:	http://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_07_1_1084_Buyuksari_Phys_Mechan_Prop_Particleboard_Heat/1380

Similar Items

Physico-Mechanical Properties of Particleboards Produced from Macadamia Nutshell and Gum Arabic
by: Derrick Mirindi, et al.
Published: (2021-11-01)

STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS
by: asghar tarmian, et al.
Published: (2004-10-01)

The impact of reeds residue addition on physical and mechanical properties of particleboard made from pomegranate prunings
by: Reza Hajihassani, et al.
Published: (2012-03-01)

Effect of loading rate on mechanical properties of micro-sized oak wood
by: Ümit Büyüksarı
Published: (2017-04-01)

THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION
by: Hossein Hosseinkhani, et al.
Published: (2000-09-01)

Effects of Steaming, Drying Temperature, and Adhesive Type on Static Bending Properties of LVL made of Picea orientalis and Abies nordmanniana veneers
by: Huseyin Peker, et al.
Published: (2014-11-01)

Effect of Cyclic Loading on the Elasticity of Beech Solid and Laminated Wood
by: Milan Gaff, et al.
Published: (2014-06-01)

Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 1. Compressibility of plywood materials
by: J. Hrázský, et al.
Published: (2005-09-01)

The influence of veneer modification on the properties of plywood glued with thermoplastic LDPE film
by: Pavlo Bekhta, et al.
Published: (2023-11-01)

ASSESSMENT OF SELECTED PHYSICAL AND MECHANICAL PROPERTIES OF CEMENT BONDED BOARD PRODUCED FROM Gliricidia sepium (AGUNMANIYE)
by: John Tosin ALADEJANA, et al.
Published: (2016-03-01)

THE EFFECTS OF THE FORCE LOADING DIRECTION ON BENDING STRENGTH AND MODULUS OF ELASTICITY IN LAMINATED VENEER LUMBER (LVL)
by: Murat Kılıç
Published: (2011-06-01)

Utilization of Recycled Polyethylene For Physical & Mechanical Properties Modification of Particleboard
by: Abolfazl Kargarfard, et al.
Published: (2016-12-01)

THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES
by: Amir Nourbakhsh, et al.
Published: (2004-10-01)

A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET
by: Saeid Kazemi najafi, et al.
Published: (2005-12-01)

Comparative analyses of water soaking and thickness swelling of particleboard versus different test methods
by: Điporović-Momčilović Milanka, et al.
Published: (2008-01-01)

The Bending Properties of Hybrid Cross-Laminated Timber (CLT) Using Various Species Combinations
by: Ahmed Altaher Omer Ahmed, et al.
Published: (2023-11-01)

Aluminum-laminated Panels: Physical and Mechanical Properties
by: Franz Segovia, et al.
Published: (2015-06-01)

The influence of particle composition in a three-layer particleboard on its physical and mechanical properties
by: J. Hrázský, et al.
Published: (2003-02-01)

Predictive Models for Modulus of Rupture and Modulus of Elasticity of Particleboard Manufactured in Different Pressing Conditions
by: Tiryaki Sebahattin, et al.
Published: (2017-07-01)

Effect of poly (ethylene-co-vinyl acetate) grade on water resistance and mechanical properties of particleboard
by: Salwanee Waelaeh, et al.
Published: (2018-10-01)

Properties of Thermoplastic-Bonded Plywood: Effects of the Wood Species and Types of the Thermoplastic Films
by: Pavlo Bekhta, et al.
Published: (2020-11-01)

Investigating the possibility of particleboard manufacture using corn (zea mays) stalks
by: Ghoncheh Rassam, et al.
Published: (2014-01-01)

The effects of thermal treatment and resin type on physical and mechanical properties of Kenaf stalk particleboard
by: Ali Pesaraklu, et al.
Published: (2013-06-01)

Investigating the Effect of Particle Slenderness Ratio on Optimizing the Mechanical Properties of Particleboard Using the Response Surface Method
by: Mohammad Arabi, et al.
Published: (2023-02-01)

withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints.
by: amir lashgari, et al.
Published: (2012-12-01)

Experimental Research on Hybrid Hardwood Glue-Laminated Beams
by: Eva Šuhajdová, et al.
Published: (2023-04-01)

Influence of Thermal Modification in Nitrogen Atmosphere on the Selected Mechanical Properties of Black Poplar Wood (<i>Populus nigra</i> L.)
by: Olga Bytner, et al.
Published: (2022-11-01)

Investigation the possibility of particleboard manufacturing using Hemp stalk
by: Masoudreza Habibi
Published: (2018-03-01)

Development of High Strength Particleboards from Hemp Shives and Corn Starch
by: Aurelija Rimkienė, et al.
Published: (2023-07-01)

Some physical and mechanical properties of Laminated Veneer Lumber reinforced with glass fiber mesh
by: Bekir Cihad Bal
Published: (2023-11-01)

Effects of the ratio of mixing the UF adhesive and the UF adhesive with increased reactivity on mechanical properties and the content of formaldehyde
by: Jaroslav Hrázský, et al.
Published: (2009-01-01)

Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing
by: Kazem Dost hosseini, et al.
Published: (2011-06-01)

INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING
by: Ahmad Jahan latibari, et al.
Published: (2001-01-01)

Effect of heat treatment on the physical and mechanical properties of compression and opposite wood of Black pine
by: Türker Dündar, et al.
Published: (2012-11-01)

Comparison of predicted thickness swelling of particleboard with fuzzy systems and artificial neural networks
by: علی بیات کشکولی, et al.
Published: (2015-05-01)

Physical and mechanical properties of particleboards manufactured using charcoal as additives
by: Kowaluk G, et al.
Published: (2017-02-01)

Mechanical Properties Of Chemically Modified Portuguese Pinewood
by: Duarte B.Lopes, et al.
Published: (2015-01-01)

Reliability of Compression Strength of Hennon Bamboo-reinforced Extruded Tubular Particleboard
by: Haiyang Zhang, et al.
Published: (2014-03-01)

Investigation of natural fibre metal laminate as car front hood
by: Noordiana Mohd Ishak, et al.
Published: (2021-01-01)

Random field characterization of uniaxial compressive strength and elastic modulus for intact rocks
by: Liu, Hua-Xin, et al.
Published: (2018)