A Study of the Mechanism Causing Pressure Waves and Knock in an SI Engine under High-Speed and Supercharged Operation

In this study, knocking over a wide range of engine speeds was visualized using an optically acssessible engine. In addition, knock under a high compression ratio and supercharged, lean combustion was investigated. The results revealed that under high-speed knock, the flame propagation velocity decl...

Full description

Bibliographic Details
Main Authors: Akira Iijima, Shuhei Takahata, Hiroki Kudo, Keito Agui, Masaaki Togawa, Kento Shimizu, Yuki Takamura, Mitsuaki Tanabe, Hideo Shoji
Format: Article
Language:English
Published: Society of Automotive Engineers of Japan, Inc. 2018-01-01
Series:International Journal of Automotive Engineering
Online Access:https://www.jstage.jst.go.jp/article/jsaeijae/9/1/9_20184085/_article/-char/ja
Description
Summary:In this study, knocking over a wide range of engine speeds was visualized using an optically acssessible engine. In addition, knock under a high compression ratio and supercharged, lean combustion was investigated. The results revealed that under high-speed knock, the flame propagation velocity declined when low-temperature oxidation reactions occurred. Subsequently, autoignition began locally and expanded gradually. Eventually, it was observed that a highly brilliant autoignited flame appeared and propagated through the unburned end gas at a high speed of approximately 1700-1800 m/s. This suggests that high-speed knock causes “developing detonation” in which combustion proceeds at a supersonic speed while pressure waves and the reaction front mutually interact. It was also found that strong knock occurred under supercharged, ultra-lean conditions (Compression Ratio: CR=14, Equivalence Ratio: Φ =0.5, Intake Pressure: Pin = 140 kPa). In addition, the application of exhaust gas recirculation markedly reduced strong pressure oscillations.
ISSN:2185-0992