Optimal resin monomer ratios for light-cured dental resins

Optimal resin monomer ratios for light-cured dental resins

Monomer ratios play a crucial role on the performances of dental resins, the optimal monomer ratios for dental resins are determined by combining the degree of conversion (DC), rate of polymerization (Rp), and mechanical properties, based on commonly-used Bis-GMA (bisphenol A-glycidyl methacrylate),...

Full description

Bibliographic Details
Main Authors:	Weideng Li, Kun Wang, Zhengzhi Wang, Bei Li
Format:	Article
Language:	English
Published:	Elsevier 2022-09-01
Series:	Heliyon
Subjects:	Light-cured dental resins Monomer ratios Degree of conversion Rate of polymerization Mechanical properties
Online Access:	http://www.sciencedirect.com/science/article/pii/S2405844022018424

Similar Items

A Scoping Review on the Polymerization of Resin-Matrix Cements Used in Restorative Dentistry
by: Rita Fidalgo-Pereira, et al.
Published: (2023-02-01)

Post-Cure Development of the Degree of Conversion and Mechanical Properties of Dual-Curing Resin Cements
by: Andreja Carek, et al.
Published: (2022-09-01)

Tailoring the monomers to overcome the shortcomings of current dental resin composites – review
by: Jingwei He, et al.
Published: (2023-12-01)

Studi Pelepasan Monomer Sisa Dari Resin Akrilik Heat Cured Setelah Perendaman Dalam Akuades
by: Viona Diansari, et al.
Published: (2016-06-01)

Influence of Dimethacrylate Monomer on the Polymerization Efficacy of Resin-Based Dental Cements—FTIR Analysis
by: Aleksandra Maletin, et al.
Published: (2022-01-01)

Efficiency of polymerization of bulk-fill composite resins: a systematic review
by: André Figueiredo REIS, et al.
Published: (2017-08-01)

Effects of Light Attenuation through Dental Tissues on Cure Depth of Composite Resins
by: Neimar Sartori, et al.
Published: (2019-01-01)

Effects of Monomer Composition of Urethane Methacrylate Based Resins on the C=C Degree of Conversion, Residual Monomer Content and Mechanical Properties
by: Codruta Sarosi, et al.
Published: (2021-12-01)

Comparative evaluation of the amount of the residual monomer in conventional and deep-frozen heat cure polymethylmethacrylate acrylic resin: An in vitro study
by: Sonali S Jadhav, et al.
Published: (2018-01-01)

Shrinkage Stress and Temperature Variation in Resin Composites Cured via Different Photoactivation Methods: Insights for Standardisation of the Photopolymerisation
by: Guilherme dos Santos Sousa, et al.
Published: (2021-06-01)

Effect of Curing Modes on the Mechanical Properties of Commercial Dental Resin-Based Composites: Comparison between Different LEDs and Microwave Units
by: Alef Vermudt, et al.
Published: (2022-09-01)

Effect of Light Intensity on the Degree of Conversion of Dual-cured Resin Cement at Different Depths with the use of Translucent Fiber Posts.
by: Mahmoud Bahari, et al.
Published: (2014-06-01)

Pre-Heating Effect on Monomer Elution and Degree of Conversion of Contemporary and Thermoviscous Bulk-Fill Resin-Based Dental Composites
by: Dóra Kincses, et al.
Published: (2021-10-01)

Influence of Curing Time on Properties of Dental Photosensitive Resin Applied in DLP Technique of 3D Printing
by: J. Redutko, et al.
Published: (2021-05-01)

Effect of the composite curing light mode on polymerization shrinkage of resin composites
by: Diğdem Eren, et al.
Published: (2012-01-01)

Intraoral Light Curing of Resin Based Material
Published: (2022-02-01)

The effect of surface treatments on the shear bond strength of acrylic resin denture base with different repair acrylic resin: An in vitro study
by: P Arun Kumar, et al.
Published: (2019-01-01)

Real-time Temperature Monitoring During Light-Curing of Experimental Composites
by: Nika Španović, et al.
Published: (2018-01-01)

Shrinkage strain – Rates study of dental composites based on (BisGMA/TEGDMA) monomers
by: A. Amirouche-Korichi, et al.
Published: (2017-02-01)

A Reliable Method of Measuring the Conversion Degrees of Methacrylate Dental Resins
by: Mirosław Kwaśny, et al.
Published: (2022-03-01)

Real-Time Feedback of the Applied Light-Curing Technique and Its Impact on Degree of Conversion of Composite Restorations—A Study with Undergraduate Dental Students
by: Phoebe Burrer, et al.
Published: (2021-10-01)

A Study on the Photopolymerization Kinetics of Selected Dental Resins Using Fourier Infrared Spectroscopy (FTIR)
by: Mirosław Kwaśny, et al.
Published: (2022-08-01)

Monomer Release from Dental Resins: The Current Status on Study Setup, Detection and Quantification for In Vitro Testing
by: Tristan Hampe, et al.
Published: (2022-04-01)

High-Power LED Units Currently Available for Dental Resin-Based Materials—A Review
by: Rita Almeida, et al.
Published: (2021-06-01)

Evaluation of intrapulpal temperature changes caused by bulk-fill composite resins cured with different light-source modes: ex vivo
by: Çiğdem Atalayın, et al.
Published: (2017-05-01)

Influence of storage times on bond strength of resin cements to root canal
by: Matheus Coêlho Bandéca, et al.
Published: (2010-03-01)

Effects of Color Modifier on Degree of Monomer Conversion, Biaxial Flexural Strength, Surface Microhardness, and Water Sorption/Solubility of Resin Composites
by: Pipop Saikaew, et al.
Published: (2021-11-01)

Polymerization Shrinkage Behavior of Light Cure Resin Composites in Cavities
by: Taichi FURUKAWA, et al.
Published: (2009-07-01)

A measurement of irradiance of light-curing units in dental offices in three Croatian cities
by: Ante Dundić, et al.
Published: (2021-08-01)

Thickness-Dependent Light Transmittance and Temperature Rise in Dual-Cure Bioactive and Light-Cure Bulk-Fill Composite Resins
by: Reema Alharbi, et al.
Published: (2023-06-01)

Properties And Decay Resistance Of Mahang (Macaranga Sp.) Treated With Phenolic Resin And Acrylic Monomer Using Vacuum-Pressure Process
by: Ang, Aik Fei
Published: (2010)

Characterization of Heat-Polymerized Monomer Formulations for Dental Infiltrated Ceramic Networks
by: Janine Tiu, et al.
Published: (2021-08-01)

Effect of low temperature and room temperature on the depth of cure of bulk-fill composite resins
by: Anna Flávia Esteves Ferreira, et al.
Published: (2023-01-01)

Effects of Different Inorganic Fillers on Mechanical Properties and Degree of Conversion of Dental Resin Composites
by: R. Stencel, et al.
Published: (2018-10-01)

Application of Antimicrobial Polymers in the Development of Dental Resin Composite
by: Jing Xue, et al.
Published: (2020-10-01)

Comparison of Surface Microhardness of the Flowable Bulk-Fill Resin and the Packable Bulk-Fill Resin according to Light Curing Time and Distance
by: Hyung-Min Kim, et al.
Published: (2023-06-01)

Curing Kinetics of Bioderived Furan-Based Epoxy Resins: Study on the Effect of the Epoxy Monomer/Hardener Ratio
by: Angela Marotta, et al.
Published: (2022-12-01)

Design and Synthesis of Functional Silane-Based Silicone Resin and Application in Low-Temperature Curing Silver Conductive Inks
by: Zhiqiang Tang, et al.
Published: (2023-03-01)

Incomplete Polymerization of Dual-Cured Resin Cement Due to Attenuated Light through Zirconia Induces Inflammatory Responses
by: Takeru Kondo, et al.
Published: (2023-06-01)

Effect of different curing modes on the degree of conversion and the microhardness of different composite restorations
by: Reem Ali Ajaj, et al.
Published: (2015-01-01)