Numerical Investigation of an Unsteady Blade Surface Blowing Method to Reduce Rotor Blade-Vortex Interaction Noise
This paper presents a numerical investigation of unsteady surface blowing using periodic variations of jet velocity with azimuthal angle to reduce helicopter rotor blade-vortex interaction (BVI) noise. The unsteady blowing is modeled as the mass flow outlet boundary condition of time-varying jet vel...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Hindawi Limited
2022-01-01
|
| Series: | International Journal of Aerospace Engineering |
| Online Access: | http://dx.doi.org/10.1155/2022/9647206 |
| Summary: | This paper presents a numerical investigation of unsteady surface blowing using periodic variations of jet velocity with azimuthal angle to reduce helicopter rotor blade-vortex interaction (BVI) noise. The unsteady blowing is modeled as the mass flow outlet boundary condition of time-varying jet velocity on the blade surface grid using computational fluid dynamics. The same high-resolution overset grid system and flow/noise solver are used to perform a detailed flow field simulation and noise prediction for the nonblowing baseline case and the steady/unsteady blowing cases under the rotor BVI condition, and a grid convergence study for the steady and unsteady blowing cases is carried out. The BVI noise reduction and rotor thrust coefficient results of the unsteady blowing method and the previously published steady blowing with constant jet velocity are then compared. The noise reduction level of unsteady blowing is approximately equivalent to that of steady blowing (noise reduction is more than 3 dB). However, the loss in rotor thrust coefficient caused by unsteady blowing (3.3%) is only half of that by steady blowing (6.3%); the air mass cost by unsteady blowing is only 63.7% of that by steady blowing per rotation revolution. The results show that unsteady blowing can effectively reduce BVI noise with lower cost and less thrust loss. |
|---|---|
| ISSN: | 1687-5974 |