| Summary: | Typical standards in aerospace applications require the ultrasonic testing (UT) of bar and wire stock with a highly reliable detection of small defects over a wide depth range in the material. Characteristic reference reflectors are flat bottom holes (FBH) with diameters smaller than 1 mm. Typically, such inspections are done with immersion tanks using a set of probes optimized for each depth. However, for industrial applications there are disadvantages such as slow scan speed, the time-consuming inlet and outlet process, complicated mechanics and significant costs of the specialized probes. This contribution demonstrates an in-line phased array inspection system with integrated multi-zone inspection, which is based on the Krautkrämer ROWA™ Ux machine. After a short description of the setup special focus is given on the implemented testing concept which is optimized with respect to a multi-zone inspection and includes a dedicated automated adjustment of the system. Furthermore, the powerful electronics allows a flexible setting of focus point, aperture size and filtering. This significantly reduces the need for special probes and by means of digital depth focusing (DDF) also the number of test shots. At the end, the flaw detectability in different depths is illustrated and achievable test speeds are presented. Moreover, external boundary conditions are discussed.
|
|---|