An experimental study of rotational pressure loss in rotor-stator gap

An experimental study of rotational pressure loss in rotor-stator gap

The annular gap between rotor and stator is an inevitable flow path of a throughflow ventilated electrical machine, but the flow entering the rotor-stator gap is subjected to the effects of rotation. The pressure loss and volumetric flow rate across the rotor-stator gap were measured and compared be...

Fuld beskrivelse

Bibliografiske detaljer
Main Authors:	Yew Chuan Chong, Dave A. Staton, Markus A. Mueller, John Chick
Format:	Article
Sprog:	English
Udgivet:	KeAi Communications Co., Ltd. 2017-06-01
Serier:	Propulsion and Power Research
Fag:	Pressure drop Flow network analysis Rotating machinery Rotational pressure drop Rotor-stator gap Annular gap Electrical machines
Online adgang:	http://www.sciencedirect.com/science/article/pii/S2212540X17300263

Lignende værker

Research of Cavitation at High Shear Stress
af: Csuka Zoltán, et al.
Udgivet: (2016-07-01)

Numerical and Experimental Study on the Effect of Rotor–Stator Distance on Rotor–Stator Interaction Strength within Mixed-Flow Centrifugal Pumps
af: Feng Han, et al.
Udgivet: (2022-08-01)

Leakage Vortex Progression through a Guide Vane’s Clearance Gap and the Resulting Pressure Fluctuation in a Francis Turbine
af: Nirmal Acharya, et al.
Udgivet: (2021-07-01)

Substitution of equations for evaluation of energy consumption in rotor-stator mixers
af: Олександр Семінський
Udgivet: (2022-10-01)

Introducing Improved Iterated Extended Kalman Filter (IIEKF) to Estimate the Rotor Rotational Speed, Rotor and Stator Resistances of Induction Motors
af: Bijan Moaveni, et al.
Udgivet: (2023-01-01)

Effect of Channel Orientation and Rib Pitch-to-Height Ratio on Pressure Drop in a Rotating Square Channel with Ribs on Two Opposite Surfaces
af: Prabhu S. V., et al.
Udgivet: (2005-01-01)

Effect of Channel Orientation and Rib Pitch-to-Height Ratio on Pressure Drop in a Rotating Square Channel with Ribs on Two Opposite Surfaces
af: S. V. Prabhu, et al.
Udgivet: (2005-01-01)

An Analysis of the Effect of Cavitation on Rotor–Stator Interaction in a Bidirectional Bulb Tubular Pump
af: Yucheng Zhou, et al.
Udgivet: (2025-01-01)

Modulation effect on rotor-stator interaction subjected to fluctuating rotation speed in a centrifugal pump
af: Shiwei Ni, et al.
Udgivet: (2023-12-01)

Forced Response Analysis of an Embedded Compressor Rotor Induced by Stator Disturbances and Rotor–Stator Interactions
af: Yun Zheng, et al.
Udgivet: (2023-04-01)

Study on Multidegree-of-Freedom Ultrasonic Motor Using Vibration Mode Rotation of Metal Spherical Stator
af: Ai Mizuno, et al.
Udgivet: (2022-01-01)

Project of Economically Profitable Technological Process of Production of Rotor and Stator Plates of Inductive Position Sensor by Blanking and Roll Bending
af: Radek ČADA, et al.
Udgivet: (2013-12-01)

Non-Isothermal Hydrodynamic Characteristics of a Nanofluid in a Fin-Attached Rotating Tube Bundle
af: Mashhour A. Alazwari, et al.
Udgivet: (2021-05-01)

Axial Gap Studies on the Flow Behavior and Performance of a Counter Rotating Turbine
af: R. Subbarao, et al.
Udgivet: (2020-01-01)

Stator current identification in generator among single and composite faults composed by static air‐gap eccentricity and rotor inter‐turn short circuit
af: Yu‐Ling He, et al.
Udgivet: (2023-02-01)

Appraisal of the Flooding Behaviour of Rotating Packed Beds
af: Usman Garba, et al.
Udgivet: (2024-09-01)

Analysis of rotors supported upon many bearings /
af: 437999 Morton, P. G.

Design and analysis of a novel rotor-segmented axial-field switched reluctance machine
af: Wei Sun, et al.
Udgivet: (2017-09-01)

Numerical Analysis of Altered Parallel Flow Heat Exchanger with Promoted Geometry at Multifarious Baffle Prolongs
af: Mehmet Akif Kartal, et al.
Udgivet: (2024-04-01)

CFD Simulation of Dry Pressure Drop in a Cross-Flow Rotating Packed Bed
af: Chao Zhang, et al.
Udgivet: (2021-10-01)

Numerical Investigation of Rotor and Stator Matching Mode on the Complex Flow Field and Pressure Pulsation of a Vaned Centrifugal Pump
af: Leilei Du, et al.
Udgivet: (2024-05-01)

Comparison of the effects of surface roughness and confinement on rotor–stator cavity flow
af: M. Özkan, et al.
Udgivet: (2017-01-01)

Experimental and Numerical Investigation of a Novel Vortex Reducer in a Co-Rotating Cavity of Aeroengines
af: Wenjie Shen, et al.
Udgivet: (2024-03-01)

Case Study of Pump Failure Due to Rotor-Stator Interaction
af: Hideo Ohashi
Udgivet: (1994-01-01)

UNSTEADY FLOW THROUGH THE GAP OF SAVONIUS TURBINE ROTOR
af: JERZY ŚWIRYDCZUK, et al.
Udgivet: (2011-01-01)

Analysis of Rotor-Stator Interaction of a Pump-Turbine with Splitter Blades in a Pump Mode
af: Haiqin Song, et al.
Udgivet: (2020-09-01)

Performance Characteristics of a Dual-Stator, Spoke-Type Permanent Magnet Vernier Machine with Support Bar
af: Jang-Hyun Park, et al.
Udgivet: (2021-02-01)

Enhancement of Rotor Loading and Suppression of Stator Separation through Reduction of the Blade–Row Gap
af: Zhuo Wang, et al.
Udgivet: (2023-03-01)

Influence of Blade Leading-Edge Shape on Cavitation in a Centrifugal Pump Impeller
af: Ran Tao, et al.
Udgivet: (2018-09-01)

Review of Core Annular Flow
af: Baoshan Xie, et al.
Udgivet: (2023-02-01)

Numerical Investigation of the Effect of Hub Gaps on the 3D Flows Inside the Stator of a Highly Loaded Axial Compressor Stage
af: Guangfeng An, et al.
Udgivet: (2022-09-01)

Investigation of effective parameters on hydrodynamics of rotating packed bed using computational fluid dynamics
af: Ali Reza Miroliaei, et al.
Udgivet: (2019-12-01)

Effect of Rotational Speed Variation on the Flow Characteristics in the Rotor-Stator System Cavity
af: Zhizhou Zhao, et al.
Udgivet: (2021-11-01)

Regular and Chaotic Vibrations of a Nonlinear Rotor-Stator System
af: Urszula Ferdek
Udgivet: (2024-11-01)

Unconventional Structures of Asynchronous Motors with Two Stators and Single-Rotor Radial Air Gaps in the Context of Their Applicability Assessment
af: Mihail-Florin Stan, et al.
Udgivet: (2024-12-01)

Consequences of Flux Gap on Intriguing Features of Modular Stator Inset Permanent Magnet Consequent Pole Synchronous Machine
af: Wasiq Ullah, et al.
Udgivet: (2022-01-01)

Study of the Hydrodynamic Performance of a Compact and Intensified G/L Contactor: The RPB
af: Garba Usman, et al.
Udgivet: (2023-01-01)

Stator-Rotor Contact Force Estimation of Rotating Machine
af: Mark Spiller, et al.
Udgivet: (2021-06-01)

Modeling and Analysis of Double Stator Slotted Rotor Permanent Magnet Generator
af: Suhairi Rizuan Che Ahmad, et al.
Udgivet: (2017-03-01)

Turbulent heat transfer in a duct with periodic wall-attached round-edge ribs/
af: 2003 ASME International Mechanical Engineering Congress (2003 : Washington, D.C.), et al.