Application of Fuzzy Logic in Control of Switched Reluctance Motor
The flux linkage of switched reluctance motor (SRM) depends on the stator current and position between the rotor and stator poles. The fact determines that during control of SRM current with the help of classical PI controllers in a wide regulation range unsatisfied results occur. The main reasons o...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
VSB-Technical University of Ostrava
2006-01-01
|
| Series: | Advances in Electrical and Electronic Engineering |
| Subjects: | |
| Online Access: | http://advances.utc.sk/index.php/AEEE/article/view/189 |
| Summary: | The flux linkage of switched reluctance motor (SRM) depends on the stator current and position between the rotor and stator poles. The fact determines that during control of SRM current with the help of classical PI controllers in a wide regulation range unsatisfied results occur. The main reasons of the mentioned situation are big changes of the stator inductance depending on the stator current and rotor position. In a switched reluctance motor the stator phase inductance is a non-linear function of the stator phase current and rotor position. Fuzzy controller and fuzzy logic are generally non-linear systems; hence they can provide better performance in this case. Fuzzy controller is mostly presented as a direct fuzzy controller or as a system, which realizes continued changing parameters of other controller, so-called fuzzy supervisor. Referring to the usage of fuzzy logic as a supervisor of conventional PI controller in control of SRM possible improvement occurs. |
|---|---|
| ISSN: | 1336-1376 1804-3119 |