| Summary: | In this study, the deviation distributions of Σ3 and Σ9 grain boundaries in a Hastelloy C-276 sheet were measured using electron backscatter diffraction technology (EBSD) and the grain boundary plane orientation was analyzed using a five-parameter technique after hot rolling at 900 °C with different thickness reductions. The results show that the relative areas of Σ3 grain boundary planes reveal a strong peak at the (111) twist position, and the corresponding intensity significantly decreases as the reduction increases. The hot rolling generates dislocations, resulting in significant deviation of Σ3 grain boundary orientations and the loss of special properties. However, the Σ9 grain boundary plane distribution (GBPD) becomes more diffused with increasing deformation, and the multiples of random distribution (MRD) value is ∼2. In addition, the large deviation of the Σ9 grain boundary orientation varies across the different strain samples. In low-strain samples, the deviation of the Σ9 grain boundary orientation may be affected by the Σ3 grain boundary deviation with construction of the Σ3–Σ3–Σ9 triple junction. The deformation microstructures mainly determine the deviation of the Σ9 grain boundary orientation in high-strain samples. Moreover, the distorted grain boundaries act as potent nucleation sites of dynamic recrystallization (DRX) during the hot rolling process.
|
|---|