Heat transfer coefficient determination using the FEM with time-dependent Trefftz-type basis functions in subcooled flow boiling in a minichannel
Results concerning flow boiling heat transfer in a vertical minichannel of 1.7 mm depth were shown. The channel was asymmetrically heated by a thin foil. Its surface temperature was recorded continuously in points by thermocouples. Measurements were carried out in 0.01 s intervals. The objective of...
Main Authors: | Maciejewska Beata, Piasecka Magdalena |
---|---|
Format: | Article |
Language: | English |
Published: |
EDP Sciences
2018-01-01
|
Series: | MATEC Web of Conferences |
Online Access: | https://doi.org/10.1051/matecconf/201824001024 |
Similar Items
-
The flow boiling heat transfer coefficient determination in a minichannel used the FEM combined with Trefftz functions
by: Piasecka Magdalena, et al.
Published: (2018-01-01) -
FEM method with the use of Trefftz functions for determination of heat transfer coefficient in a minichannel
by: Maciejewska Beata, et al.
Published: (2012-04-01) -
The heat transfer coefficient determination with the use of the Beck-Trefftz method in flow boiling in a minichannel
by: Strąk Kinga, et al.
Published: (2018-01-01) -
The heat transfer coefficient determination with the use of the Beck-Trefftz method in flow boiling in a minichannel
by: Strąk Kinga, et al.
Published: (2018-01-01) -
Development of FEM Calculation Methods to Analyse Subcooled Boiling Heat Transfer in Minichannels Based on Experimental Results
by: Magdalena Piasecka, et al.
Published: (2022-12-01)