Applicability Assessment of Electrocoagulation in Real Dyeing Wastewater Treatment
In this study, the applicability of electrocoagulation using iron electrodes in real dyeing wastewater treatment was assessed based on pollutants removal efficiency, sludge generation, energy consumption and operation cost in practice. The effects of current density, pH, conductivity, and reaction t...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Technoscience Publications
2021-06-01
|
| Series: | Nature Environment and Pollution Technology |
| Subjects: | |
| Online Access: | https://neptjournal.com/upload-images/(15)D-1118.pdf |
| Summary: | In this study, the applicability of electrocoagulation using iron electrodes in real dyeing wastewater treatment was assessed based on pollutants removal efficiency, sludge generation, energy consumption and operation cost in practice. The effects of current density, pH, conductivity, and reaction time on treatment performance were evaluated. The operation cost of electrocoagulation was calculated including the energy cost, the iron plate cost, generated sludge treatment cost, and added substances cost. The results indicated that the colour, CODcr and TSS removal efficiencies were high and quite stable with short reaction time (reached 92.07 ± 1.21%, 65.7 ± 1.47%, and 89.8 ± 1.2%, respectively, with only 15 min). Average sludge generation, specific energy consumption, and operation cost were determined respectively as 0.645±0.0543 kg/m3, 1.182 kWh/m3 and 0.517 USD/m3. Coagulation-flocculation using FeSO4 was performed as a control experiment as well. Compared to coagulation-flocculation, electrocoagulation has the same removal efficiency but has less generated sludge (only 50%) and little to no added chemicals. Therefore, the operating cost was quite less than the others, with only 0.517 USD/m3 instead of 1.99 USD/m3 (equal to 1/3.5). |
|---|---|
| ISSN: | 0972-6268 2395-3454 |