| Summary: | A PV system’s operation highly depends on weather conditions. In case of varying irradiances or load changes, there is a power mismatch between various modules of the PV array. This power mismatch causes instability in the output of the PV system and deteriorates the overall system efficiency. To overcome instability and lower efficiency problems, and to extract maximum power from the PV system, various maximum power point tracking (MPPT) techniques are employed. The success of these techniques depends on the identification of the actual operating conditions of the system. This article proposes a hybrid maximum power point tracking (MPPT) technique that is capable of efficiently differentiating between uniform irradiance, non-uniform irradiance, and load variations on the PV system. Based on the identified operating conditions, the proposed method uses modified perturb and observe (Modified P&O) to cope with uniform irradiance variations and chimp optimization algorithms (ChOA) for non-uniform conditions to track the oscillation free maximum power-point. The proposed method is implemented and verified using a 4 × 3 PV array model in MATLAB Simulink software. Different cases of uniformly changing irradiance and non-uniformly changing irradiance are applied to test the performance of the proposed hybrid technique. The load varying conditions are performed by applying a variable load resistor. The authenticity of the proposed hybrid technique is critically evaluated against the well-known and most widely used optimization techniques of modified perturb and observe (Modified P&O), particle swarm optimization (PSO), flower pollination algorithm (FPA), and grey wolf optimization (GWO). The results demonstrate the superiority of the proposed technique in oscillation-free tracking of global maximum power point (GMPP) in a minimum tracking time of 0.4 s and 0.15 s, and steady-state MPPT efficiency of 96.92% and 99.54% under uniform and non-uniform irradiance conditions, respectively.
|
|---|