Optimization of perforation parameters for horizontal wells in shale reservoir
Volume fracturing of horizontal wells is the key technology for efficient development of shale reservoirs, and perforation is the basic condition of hydraulic fracturing. In this paper, based on the basic equation of fluid–structure coupling and the cohesive fracture model, a three-dimensional numer...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Elsevier
2021-11-01
|
| Series: | Energy Reports |
| Subjects: | |
| Online Access: | http://www.sciencedirect.com/science/article/pii/S2352484721009690 |
| _version_ | 1818436317663461376 |
|---|---|
| author | Kangxing Dong Qiaoer Li Wei Liu Xinrui Zhao Shanren Zhang |
| author_facet | Kangxing Dong Qiaoer Li Wei Liu Xinrui Zhao Shanren Zhang |
| author_sort | Kangxing Dong |
| collection | DOAJ |
| description | Volume fracturing of horizontal wells is the key technology for efficient development of shale reservoirs, and perforation is the basic condition of hydraulic fracturing. In this paper, based on the basic equation of fluid–structure coupling and the cohesive fracture model, a three-dimensional numerical model of spiral perforation hydraulic fracture propagation in near well bore horizontal wells was established. The pipe flow elements were introduced to characterize the automatic distribution of fluid and the pressure drop caused by friction. The results show that the vertical perforation initiation pressure is lower than the horizontal perforation, the vertical perforation is easier to release energy after initiation, the fracturing fluid is easier to flow into the vertical perforation, and eventually form 1–2 major fractures. The common rule among different pore densities is that the fracture distribution at both ends of the cluster is more, and the fracture distribution in the middle is less, and the gap between the two increases with the increase of injection. When the hole density is higher than 8 P/m, the uneven development of fractures is significant. If the hole density is 4 P/m, the number of effective fractures around the wellbore decreases. Therefore, it is suggested that the optimal hole density is 8 P/m. With the increase of perforation depth, the effective area of liquid pressure on the hole wall increases, and the initiation pressure decreases. With the increase of the diameter of the hole, the initiation pressure is lower and the initiation and extension of the fracture are easier. Compared with pore diameter, the effect of pore depth on fracture propagation is greater than that of pore diameter. Under the calculation conditions, it is recommended that 8 P/m, hole depth is 0.8 m, and aperture is 20 mm. |
| first_indexed | 2024-12-14T17:06:52Z |
| format | Article |
| id | doaj.art-29f06c2cc24749b78e53f4608f11d229 |
| institution | Directory Open Access Journal |
| issn | 2352-4847 |
| language | English |
| last_indexed | 2024-12-14T17:06:52Z |
| publishDate | 2021-11-01 |
| publisher | Elsevier |
| record_format | Article |
| series | Energy Reports |
| spelling | doaj.art-29f06c2cc24749b78e53f4608f11d2292022-12-21T22:53:41ZengElsevierEnergy Reports2352-48472021-11-01711211130Optimization of perforation parameters for horizontal wells in shale reservoirKangxing Dong0Qiaoer Li1Wei Liu2Xinrui Zhao3Shanren Zhang4School of mechanical science and engineering, Northeast Petroleum University, Daqing, Heilongjiang, China; Corresponding authors.School of mechanical science and engineering, Northeast Petroleum University, Daqing, Heilongjiang, ChinaSchool of mechanical science and engineering, Northeast Petroleum University, Daqing, Heilongjiang, China; Corresponding authors.School of mechanical science and engineering, Northeast Petroleum University, Daqing, Heilongjiang, ChinaGreat Wall Drilling Engineering Co., Ltd., Panjin, Liaoning, ChinaVolume fracturing of horizontal wells is the key technology for efficient development of shale reservoirs, and perforation is the basic condition of hydraulic fracturing. In this paper, based on the basic equation of fluid–structure coupling and the cohesive fracture model, a three-dimensional numerical model of spiral perforation hydraulic fracture propagation in near well bore horizontal wells was established. The pipe flow elements were introduced to characterize the automatic distribution of fluid and the pressure drop caused by friction. The results show that the vertical perforation initiation pressure is lower than the horizontal perforation, the vertical perforation is easier to release energy after initiation, the fracturing fluid is easier to flow into the vertical perforation, and eventually form 1–2 major fractures. The common rule among different pore densities is that the fracture distribution at both ends of the cluster is more, and the fracture distribution in the middle is less, and the gap between the two increases with the increase of injection. When the hole density is higher than 8 P/m, the uneven development of fractures is significant. If the hole density is 4 P/m, the number of effective fractures around the wellbore decreases. Therefore, it is suggested that the optimal hole density is 8 P/m. With the increase of perforation depth, the effective area of liquid pressure on the hole wall increases, and the initiation pressure decreases. With the increase of the diameter of the hole, the initiation pressure is lower and the initiation and extension of the fracture are easier. Compared with pore diameter, the effect of pore depth on fracture propagation is greater than that of pore diameter. Under the calculation conditions, it is recommended that 8 P/m, hole depth is 0.8 m, and aperture is 20 mm.http://www.sciencedirect.com/science/article/pii/S2352484721009690Shale reservoirPerforation parametersFlow distributionNumerical simulation |
| spellingShingle | Kangxing Dong Qiaoer Li Wei Liu Xinrui Zhao Shanren Zhang Optimization of perforation parameters for horizontal wells in shale reservoir Energy Reports Shale reservoir Perforation parameters Flow distribution Numerical simulation |
| title | Optimization of perforation parameters for horizontal wells in shale reservoir |
| title_full | Optimization of perforation parameters for horizontal wells in shale reservoir |
| title_fullStr | Optimization of perforation parameters for horizontal wells in shale reservoir |
| title_full_unstemmed | Optimization of perforation parameters for horizontal wells in shale reservoir |
| title_short | Optimization of perforation parameters for horizontal wells in shale reservoir |
| title_sort | optimization of perforation parameters for horizontal wells in shale reservoir |
| topic | Shale reservoir Perforation parameters Flow distribution Numerical simulation |
| url | http://www.sciencedirect.com/science/article/pii/S2352484721009690 |
| work_keys_str_mv | AT kangxingdong optimizationofperforationparametersforhorizontalwellsinshalereservoir AT qiaoerli optimizationofperforationparametersforhorizontalwellsinshalereservoir AT weiliu optimizationofperforationparametersforhorizontalwellsinshalereservoir AT xinruizhao optimizationofperforationparametersforhorizontalwellsinshalereservoir AT shanrenzhang optimizationofperforationparametersforhorizontalwellsinshalereservoir |