Manufacture of Concrete Paver Blocks with Recycled Demolition Waste

Due to rapid urbanization there is a great increase in building construction, so is the demoli-tion. There is no proper disposal of the demolition waste. About 530 million tons of C&D waste is generated annually. But only a few amounts of demolished concrete is recycled or reused. In this study...

Πλήρης περιγραφή

Λεπτομέρειες βιβλιογραφικής εγγραφής
Κύριοι συγγραφείς: G. Balasubramanian, D. Salvia, D. Bharathi
Μορφή: Άρθρο
Γλώσσα:English
Έκδοση: Electronic Journals for Science and Engineering - International 2020-06-01
Σειρά:Electronic Journal of Structural Engineering
Θέματα:
Διαθέσιμο Online:http://10.0.0.97/EJSE/article/view/249
Περιγραφή
Περίληψη:Due to rapid urbanization there is a great increase in building construction, so is the demoli-tion. There is no proper disposal of the demolition waste. About 530 million tons of C&D waste is generated annually. But only a few amounts of demolished concrete is recycled or reused. In this study, experimental investigations have been carried out to evaluate the effect of complete replacement of fine aggregate by dem-olition waste on compressive strength, which is compared with a conventional block. The concrete blocks were made in M20 mix. Further, the test was carried out in concrete paver block, in M40 mix design. The concrete paver blocks show 91% strength attainment at 28 days and it is only a marginal deterioration in the compressive strength. Therefore, the concrete blocks made with demolition waste can be used in low load bearing pavements.
ISSN:1443-9255