High strength porous PLA gyroid scaffolds manufactured via fused deposition modeling for tissue-engineering applications

High strength porous PLA gyroid scaffolds manufactured via fused deposition modeling for tissue-engineering applications

Gyroid polylactic acid (PLA) scaffolds with different unit cell sizes of 2 mm (G2), 2.5 mm (G25), and 3 mm (G3) were fabricated via fused deposition modeling for bone tissue engineering applications. The porosity of the PLA scaffolds ranged from 86% to 90%. The structural anisotropy value of the...

Full description

Bibliographic Details
Main Authors:	Mona Alizadeh-Osgouei, Yuncang Li, Alireza Vahid, Arash Ataee, Cuie Wen
Format:	Article
Language:	English
Published:	KeAi Communications Co., Ltd. 2021-01-01
Series:	Smart Materials in Medicine
Subjects:	Additive manufacturing Fused deposition modeling Gyroid PLA Porous scaffolds
Online Access:	http://www.sciencedirect.com/science/article/pii/S2590183420300302

Similar Items

Advancing the additive manufacturing of PLA-ZnO nanocomposites by fused filament fabrication
by: Wei Juene Chong, et al.
Published: (2024-12-01)

Simulation of the Mechanical Behaviour of Metal Gyroids for Bone Tissue Application
by: Fabrizia Caiazzo, et al.
Published: (2021-08-01)

Strength and Dimension Accuracy in Fused Deposition Modeling : A Comparative Study on Parts Making Using ABS and PLA Polymers
by: Yopi Yusuf Tanoto, et al.
Published: (2020-05-01)

Effect of Printing Parameters on Mechanical Behaviour of PLA-Flax Printed Structures by Fused Deposition Modelling
by: Yassine Elias Belarbi, et al.
Published: (2021-10-01)

Investigating the Material Properties and Microstructural Changes of Fused Filament Fabricated PLA and Tough-PLA Parts
by: Nida Naveed
Published: (2021-05-01)

Application of fused deposition modeling (FDM) on bone scaffold manufacturing process: A review
by: Rochmad Winarso, et al.
Published: (2022-11-01)

Additive-Manufactured Gyroid Scaffolds of Magnesium Oxide, Phosphate Glass Fiber and Polylactic Acid Composite for Bone Tissue Engineering
by: Lizhe He, et al.
Published: (2021-01-01)

Predicting Critical Loads in Fused Deposition Modeling Graphene-Reinforced PLA Plates Containing Notches Using the Point Method
by: Sergio Cicero, et al.
Published: (2023-09-01)

Elastic response of anisotropic Gyroid cellular structures under compression: Parametric analysis
by: Xing Peng, et al.
Published: (2021-07-01)

Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity
by: Mariana Flores-Jimenez, et al.
Published: (2022-04-01)

Effect of Porosity and Injection Ratio on the Performance of Transpiration Cooling through Gyroids
by: Benjamin J. Brimacombe, et al.
Published: (2023-12-01)

Characterization and In Vitro Evaluation of Porous Polymer-Blended Scaffolds Functionalized with Tricalcium Phosphate
by: Iwona Pudełko-Prażuch, et al.
Published: (2024-02-01)

Fused Deposition Modeling Printed PLA/Nano β-TCP Composite Bone Tissue Engineering Scaffolds for Promoting Osteogenic Induction Function
by: Wang W, et al.
Published: (2023-10-01)

In-Silico Prediction of Mechanical Behaviour of Uniform Gyroid Scaffolds Affected by Its Design Parameters for Bone Tissue Engineering Applications
by: Haja-Sherief N. Musthafa, et al.
Published: (2023-09-01)

Mechanical and permeability properties of skeletal and sheet triply periodic minimal surface scaffolds in bone defect reconstruction
by: Alejandro Yánez, et al.
Published: (2024-03-01)

Effects of MgO nanoparticle addition on the mechanical properties, degradation properties, antibacterial properties and in vitro and in vivo biological properties of 3D-printed Zn scaffolds
by: Leiting Yu, et al.
Published: (2024-07-01)

The Effect of Infill Pattern on Tensile Strength of PLA Material in Fused Deposition Modeling (FDM) Process
by: Maria Jasim, et al.
Published: (2022-12-01)

Mechanical Strength of Bamboo Filled PLA Composite Material in Fused Filament Fabrication
by: Scott Landes, et al.
Published: (2020-10-01)

3D-printed PLA-Gr-Mg composite scaffolds for bone tissue engineering applications
by: Meysam Mohammadi-Zerankeshi, et al.
Published: (2023-01-01)

Study of the Thermal and Hydraulic Performance of Porous Block versus Gyroid Structure: Experimental and Numerical Approaches
by: Mohamad Ziad Saghir, et al.
Published: (2024-02-01)

The Influence of Raster Angle and Moisture Content on the Mechanical Properties of PLA Parts Produced by Fused Deposition Modeling
by: Mohammed Algarni
Published: (2021-01-01)

Pellet-Based Fused Filament Fabrication (FFF)-Derived Process for the Development of Polylactic Acid/Hydroxyapatite Scaffolds Dedicated to Bone Regeneration
by: Marie Bayart, et al.
Published: (2022-08-01)

PCL strut-like scaffolds appear superior to gyroid in terms of bone regeneration within a long bone large defect: An in silico study
by: Mahdi Jaber, et al.
Published: (2022-09-01)

Influence of Fused Deposition Modelling Nozzle Temperature on the Rheology and Mechanical Properties of 3D Printed β-Tricalcium Phosphate (TCP)/Polylactic Acid (PLA) Composite
by: Karim Elhattab, et al.
Published: (2022-03-01)

Block copolymer gyroids for nanophotonics: significance of lattice transformations
by: Park Haedong, et al.
Published: (2022-01-01)

Fused deposition modeling of poly(ether ether ketone) scaffolds
by: Song Xiaohui, et al.
Published: (2021-02-01)

On the Failure of Classic Elasticity in Predicting Elastic Wave Propagation in Gyroid Lattices for Very Long Wavelengths
by: Giuseppe Rosi, et al.
Published: (2020-07-01)

Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
by: Eda Hazal Baran, et al.
Published: (2019-03-01)

Use of Data Mining Techniques for the Prediction of Surface Roughness of Printed Parts in Polylactic Acid (PLA) by Fused Deposition Modeling (FDM): A Practical Application in Frame Glasses Manufacturing
by: Esther Molero, et al.
Published: (2020-04-01)

Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model
by: Zatul Faqihah Mohd Salaha, et al.
Published: (2023-04-01)

Mesh generation and mechanical tests of basic element cells of porous structures
by: Luboš Řehounek, et al.
Published: (2022-03-01)

Magnesium Hydroxide as a Versatile Nanofiller for 3D-Printed PLA Bone Scaffolds
by: Wang Guo, et al.
Published: (2024-01-01)

Topological Surface States in a Gyroid Acoustic Crystal
by: Yuning Guo, et al.
Published: (2023-02-01)

Evaluation of the Joining Response of Biodegradable Polylactic Acid (PLA) from Fused Deposition Modeling by Infrared Laser Irradiation
by: J. M. Vazquez-Martinez, et al.
Published: (2020-10-01)

Gradient 3D Printed PLA Scaffolds on Biomedical Titanium: Mechanical Evaluation and Biocompatibility
by: Diana V. Portan, et al.
Published: (2021-02-01)

Performance of 3D printed porous polyetheretherketone composite scaffolds combined with nano-hydroxyapatite/carbon fiber in bone tissue engineering: a biological evaluation
by: Lian Mi, et al.
Published: (2024-01-01)

Numerical Modeling and Experimental Investigation of Effective Elastic Properties of the 3D Printed Gyroid Infill
by: Philip Bean, et al.
Published: (2022-02-01)

Degradation of 3D-Printed Porous Polylactic Acid Scaffolds Under Mechanical Stimulus
by: Heming Chen, et al.
Published: (2021-10-01)

Development of Antimicrobial PLA Composites for Fused Filament Fabrication
by: Zachary Brounstein, et al.
Published: (2021-02-01)

Experimental and Numerical Study of Printing Strategy Impact on the Mechanical Properties of Sustainable PLA Materials
by: Emil Spišák, et al.
Published: (2023-12-01)