Phosphorus Removal in VFCWs with Lightweight Aggregates Made of Fly Ash from Sewage-Sludge Thermal Treatment (FASSTT LWA)

This study analyzed the effect of lightweight aggregates made of fly ash from sewage-sludge thermal treatment (FASSTT LWA) on the effectiveness of phosphorus removal from wastewater in vertical constructed wetlands (CWs), depending on FASSTT LWA content in the CW filling and hydraulic loading rate....

Full description

Bibliographic Details
Main Authors: Joanna Rodziewicz, Artur Mielcarek, Wojciech Janczukowicz, Andrzej Białowiec, Jorge Manuel Rodrigues Tavares, Krzysztof Jóźwiakowski, Arthur Thornton
Format: Article
Language:English
Published: MDPI AG 2023-05-01
Series:Water
Subjects:
Online Access:https://www.mdpi.com/2073-4441/15/10/1955
Description
Summary:This study analyzed the effect of lightweight aggregates made of fly ash from sewage-sludge thermal treatment (FASSTT LWA) on the effectiveness of phosphorus removal from wastewater in vertical constructed wetlands (CWs), depending on FASSTT LWA content in the CW filling and hydraulic loading rate. It was performed over 13 weeks using 15 lysimeters prepared as double-layer systems. An upper layer was made of FASSTT LWA above the gravel layer with different thicknesses of FASSTT LWA (CW 0 cm: only gravel; CW 12 cm, CW 25 cm; CW 50 cm, and CW 100 cm: only FASSTT LWA). Each filling variant was repeated three times. Wastewater with a mean phosphorus concentration of 7.43 mgP/L was fed to the lysimeters once a day. The hydraulic loading rates tested were 3.0, 5.0, and 7.0 mm/d. Both the increased FASSTT LWA content in the CW filling and the decreasing hydraulic loading rate were found to boost the effectiveness of phosphorus removal in the treated wastewater. Constructed wetland filled in 100 % with FASSTT LWA ensured a reduction in phosphorus concentration below 2.0 mg P/L at all hydraulic loading rates tested.
ISSN:2073-4441