Numerical and experimental validation of SMArt thermography for the inspection of wind blade composite laminate
Abstract An innovative active thermography technique is proposed for the inspection of typical wind blade material. The proposed technique is based on the use of a multifunctional material obtained adding a grid of Shape Memory Alloy wires, which would serve also as a protection against lightning, t...
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Springer
2020-09-01
|
Series: | SN Applied Sciences |
Subjects: | |
Online Access: | https://doi.org/10.1007/s42452-020-03428-0 |
Summary: | Abstract An innovative active thermography technique is proposed for the inspection of typical wind blade material. The proposed technique is based on the use of a multifunctional material obtained adding a grid of Shape Memory Alloy wires, which would serve also as a protection against lightning, to a traditional glass fibre composite panel. This technique, called SMArt thermography, which exploits the SMA wires as internal heat sources, has been compared to a traditional pulsed thermography in the case of a representative panel of unidirectional glass fibre and epoxy matrix with embedded SMA wires and artificial defects. The experimental results of the two techniques are reported and compared to the result of a numerical FEM transient model, in order to establish the reliability and the detectability limit of the proposed technique. The FEM model has been proven to be a useful tool for the definition of the multifunctional material at a design stage. |
---|---|
ISSN: | 2523-3963 2523-3971 |