| Summary: | The technology of the divider and lifter mechanisms of a garlic harvester using the depth limit, straw divide, and straw lift modes was studied in Lanling County, Shandong Province, China, according to the characteristics of high hardness, good uprightness and narrow row spacing of garlic planting. A test prototype of the divider and lifter mechanisms of the garlic harvester was designed and manufactured. Single-factor experiments and orthogonal regression experiments were carried out using the experimental factors of working speed, the angle of the divider, the height of the tip of the divider’s tooth from the ground, the ratio of the lifter’s speed to working speed and the length of the lifter’s tooth. The index was the success rate of feed. The results showed that the working speed, the angle of the divider and the length of the lifter’s tooth had a significant influence on the success rate of feed (<i>p</i> < 0.05), but the experimental factors of the height of the tip of the divider’s tooth from the ground and the ratio of the lifter’s speed to working speed did not have a significant influence on the success rate of feed (<i>p</i> > 0.05). The effects of the angle of the divider, the working speed, and the length of the divider’s tooth on the success rate of feed decreased in significance. When the working speed was 0.72 km·h<sup>−1</sup>, the length of the lifter’s tooth was 343.5 mm and the angle of the divider was 20°, the success rate of feed was the highest (98.18%). The research results are conducive to promoting high-quality and efficient combined harvesting of garlic in Lanling County, Shandong Province, China.
|
|---|