| Summary: | Homodyne demodulation is a convenient technique for signal detection in interferometric sensors. The demodulation process is typically developed using analog circuits. However, to improve the performance of the demodulator, a digital system must be employed. In this study, we developed an optical fiber sensor by combining: (a) a Michelson interferometer, (b) a micro-electro-mechanical system (MEMS) device, and (c) a field-programmable gate array (FPGA)-based interrogator. Signal processing was integrated into the FPGA-embedded system. The homodyne demodulation algorithm was implemented with hardware modules developed in the hardware description language (HDL) to provide a portable, low-cost, and scalable digital system. The present study successfully demonstrates the development and validation of an FPGA-based interrogator capable of processing interferograms through a homodyne demodulation scheme. The experimental results reveal proper displacement measurements of the proof-mass MEMS and the low amount of hardware resources used. The displacement measurements obtained from the system matched those obtained from a certified characterization system. As the system can be easily reconfigured to the required measured signal, a similar measurement methodology can be developed using other demodulation schemes and optical fiber sensors.
|
|---|