Fine Blanking of Austenitic Stainless Steel Gears Using Carbon-Supersaturated High-Speed Steel Tools
Austenitic stainless steel gears were fabricated via the fine blanking process that can be used for mass production. A carbon-supersaturated (CS)-matrix high-speed steel punch was prepared to minimize the adhesive and abrasive wear damage. Its edge profile was tailored and finished to control the lo...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2023-09-01
|
| Series: | Machines |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2075-1702/11/9/896 |
| Summary: | Austenitic stainless steel gears were fabricated via the fine blanking process that can be used for mass production. A carbon-supersaturated (CS)-matrix high-speed steel punch was prepared to minimize the adhesive and abrasive wear damage. Its edge profile was tailored and finished to control the local metal flow around the punch edges and edge corners. This CS punch was utilized in fine blanking the AISI304 austenitic stainless steel gears. Ball-on-disc (BOD) testing was first employed to describe the frictional behavior of the CS tool steel disc against the AISI304 stainless steel balls. SEM-EDX analysis on the wear track revealed that a free-carbon tribofilm was formed in situ in the wear track to prevent adhesive wear via galling on the tool steel disc. No significant adhesive or abrasive wear was detected on the punch edges and punch edge corners after continuously fine blanking with 50 strokes. AISI304 gears were produced to have fully burnished surfaces. Their pitches, widths and circles were measured to evaluate their gear-grade balancing during the fine blanking process. The stabilized gear-grade balancing in JIS-9 to JIS-10 grades was attained for these as-blanked AISI304 gears without finishing processes. |
|---|---|
| ISSN: | 2075-1702 |