Technological Assessment of the Possibility of Making Light-section Castings of GX2CrNiMoN25-6-3 Cast Steel by the Centrifugal Casting Method
The paper presents the results of investigation into the technological possibility of making light-section castings of GX2CrNiMoN25-6-3 cast steel. For making castings with a wall thickness in the thinnest place as small as below 1 mm, the centrifugal casting technology was employed. The technology...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Polish Academy of Sciences
2015-09-01
|
| Series: | Archives of Foundry Engineering |
| Subjects: | |
| Online Access: | http://www.degruyter.com/view/j/afe.2015.15.issue-3/afe-2015-0060/afe-2015-0060.xml?format=INT |
| Summary: | The paper presents the results of investigation into the technological possibility of making light-section castings of GX2CrNiMoN25-6-3 cast steel. For making castings with a wall thickness in the thinnest place as small as below 1 mm, the centrifugal casting technology was employed. The technology under consideration enables items with high surface quality to be obtained, while providing a reduced consumption of the charge materials and, as a result, a reduction in the costs of unit casting production. |
|---|---|
| ISSN: | 2299-2944 |