| Summary: | Additive manufacturing (AM) is a rapidly growing technology with promising results and challenges. The aim of this study is to optimize the process parameters of fused deposition modeling (FDM) by exploring the wear performance of Polylactic acid (PLA). In this work, variation of process parameters like layer thickness, orientation and extruder temperature has been investigated. Based on these parameters wear specimen (accordance to ASTM G99) was printed by using FDM. The wear behavior of polymer pin under low sliding speed was investigated. Taguchi Design of experiments by using L _9 orthogonal array is applied to optimize the process parameters at which minimum wear rate is obtained and the same has also been investigated by using analysis of variance (ANOVA) and artificial neural network (ANN) technique for rigorous validation / optimization. Results shows that build orientation have major influence on the wear performance of polymer pin. The paper is presented with the display of results, discussion, and conclusions drawn.
|
|---|