Preparation of millimeter-scale hard layer on the surface of titanium alloy via self-propagating high temperature synthesis combined with hot pressing sintering process

Preparation of millimeter-scale hard layer on the surface of titanium alloy via self-propagating high temperature synthesis combined with hot pressing sintering process

A hard and thick surface strengthening layer with high interfacial bonding strength was innovatively prepared via self-propagating high temperature synthesis (SHS) combined with hot pressing sintering (HPS) process. The thickness of the surface layer reached 1.1 mm, far exceeding the strengthening l...

Full description

Bibliographic Details
Main Authors:	Xinyu Shen, Tiejian Su, Qunbo Fan, Shun Xu, Lin Yang, Haichao Gong, Qianyun Yan, Cheng Cai
Format:	Article
Language:	English
Published:	Elsevier 2022-11-01
Series:	Journal of Materials Research and Technology
Subjects:	Self-propagating high temperature synthesis Hot pressing sintering Titanium alloys Hard layer Interfacial bonding strength
Online Access:	http://www.sciencedirect.com/science/article/pii/S2238785422016635

Similar Items

Hot-pressing sintering diffusion bonding of a high-toughness titanium alloy and an ultra-high-strength steel with Ta/Ni dual-interlayer
by: Chengwei Li, et al.
Published: (2024-03-01)

Microstructure and Mechanical Properties of Graphene Oxide-Reinforced Titanium Matrix Composites Synthesized by Hot-Pressed Sintering
by: Jingqi Liu, et al.
Published: (2019-03-01)

Study on the Sintered Characteristics and Properties of Co-30 mass% Cr Alloys under Various Vacuum Hot-Press Sintering Temperatures and Pressures
by: Shih-Hsien Chang, et al.
Published: (2020-03-01)

Modeling solid-state sintering with externally applied pressure: a geometric force approach
by: Shaohua Chen, et al.
Published: (2016-12-01)

EFFECT OF BINDER COMPOSITION AND SINTERING TEMPERATURE ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF WC-7(Ni,Fe) HARD ALLOYS
by: Phuong Dinh Doan, et al.
Published: (2019-06-01)

Hot Consolidation of Titanium Powders
by: Gennady A. Pribytkov, et al.
Published: (2023-06-01)

Properties of Sinters Produced from Commercially Available Powder Mixtures
by: Borowiecka-Jamrozek J., et al.
Published: (2016-12-01)

Pressing and Sintering of Titanium Aluminide Powder after Ball Milling in Silane-Doped Atmosphere
by: Bernd-Arno Behrens, et al.
Published: (2023-09-01)

Comparison of the effects of MoSi2 and CrSi2 on sintering and properties of titanium diboride (TiB2)
by: Gubernat Agnieszka, et al.
Published: (2023-12-01)

Microstructure and mechanical properties of Cu-ZTA cermet prepared by vacuum hot pressing sintering
by: Da-Ming Sun, et al.
Published: (2020-01-01)

Fracture toughness of Si3N4 processed by gas pressure sintering and hot pressing
by: Cláudio V. Rocha, et al.
Published: (2006-06-01)

Microstructure of a V-Containing Cobalt Based Alloy Prepared by Mechanical Alloying and Hot Pressed Sintering
by: Niannian Li, et al.
Published: (2019-04-01)

Effect of non-reactive hard particles on sintered Fe material
by: Thanyaporn Yodkaew, et al.
Published: (2009-11-01)

Spark Plasma Sintering and Hot Pressing of Cu+Al Powder Mixtures and Pre-Deposited Cu/Al Layers
by: Dina V. Dudina, et al.
Published: (2023-11-01)

Novel TiC-based ceramic with enhanced mechanical properties by reaction hot-pressing at low temperature
by: Lanqing Liang, et al.
Published: (2023-05-01)

On the nanoindentation behavior of a TiC layer formed through thermo-reactive diffusion during hot pressing of Ti and cast iron
by: Marius Grad, et al.
Published: (2022-09-01)

Research on hot isostatic pressing sintering behavior of 90W–Ni–Fe–Cu alloy
by: Jianning Wang, et al.
Published: (2023-09-01)

Comparative study of the behaviour of several reinforcement materials in titanium matrix produced by Rapid Sinter Pressing Manufacturing
by: Eva M. Pérez-Soriano, et al.
Published: (2022-12-01)

EFFECTS OF SINTERING CONDITIONS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF REACTIVE HOT PRESSED TiB₂-SiC CERAMIC COMPOSITES
by: Guolong Zhao, et al.
Published: (2016-07-01)

Effect of Expanded Graphite on the Reaction Sintering of Boron Carbide
by: Agnieszka Gubernat, et al.
Published: (2022-02-01)

Microstructure, Mechanical Properties and Oxidation Resistance of Nb-Si Based Ultrahigh-Temperature Alloys Prepared by Hot Press Sintering
by: Lijing Zhang, et al.
Published: (2023-05-01)

TITANIUM SHEET HOT FORMING IN THE AEROSPACE INDUSTRY
by: SANA Guillaume
Published: (2020-01-01)

Microstructure and mechanical properties of Fe-ZTA cermet prepared by vacuum hot-pressed sintering
by: Daming Sun, et al.
Published: (2020-01-01)

Spark Plasma Sintering of a Hard Metal Powder Obtained from Hard Metal Scrap
by: Angélica da Cunha dos Santos, et al.
Published: (2017-03-01)

Effect of hot pressing variables on the microstructure, relative density and hardness of sterling silver (Ag-Cu alloy) powder compacts
by: B. Henriques, et al.
Published: (2014-02-01)

Effect of sintering temperature on microstructure and properties of nano-WC particle reinforced copper matrix composites prepared by hot-pressing sintering
by: Weiwei Zhou, et al.
Published: (2020-01-01)

The effect of CNT content and sintering temperature on some properties of CNT-reinforced MgAl composites
by: Islak Serkan, et al.
Published: (2017-01-01)

Microstructure and mechanical properties of Cu–Fe-ZTA cermets prepared by vacuum hot pressing sintering
by: Qi Gao, et al.
Published: (2022-09-01)

Enhanced tensile properties and wear resistance of Tip/AZ31 composites prepared by hot-press sintering
by: Junliu Ye, et al.
Published: (2024-03-01)

Effects of Reinforcement Ratios and Sintering Temperatures on the Mechanical Properties of Titanium Nitride/Nickel Composites
by: Yi-Cheng Chen, et al.
Published: (2020-10-01)

Densification modeling of titanium alloy powder during hot isostatic pressing
by: Xue Y., et al.
Published: (2011-01-01)

Effect of Different Hot-Pressing Pressure and Temperature on the Performance of Titanium Mesh-Based MEA for DMFC
by: Xingxing Wang, et al.
Published: (2022-04-01)

Electrophysical Properties of PZT-Type Ceramics Obtained by Two Sintering Methods
by: Przemysław Niemiec, et al.
Published: (2023-10-01)

Microstructure evolution of TC4 powder by spark plasma sintering after hot deformation
by: Yan Jiangpeng, et al.
Published: (2020-09-01)

<i>In Situ</i> Ti6Al4V/TiB Composites Prepared by Hydrogen-Assisted Sintering of Blends Containing TiH<sub>2</sub> and Ball-Milled Ti+TiB<sub>2</sub> Powders
by: Yuchao Song, et al.
Published: (2022-01-01)

Sintered FeCuRe Alloys Produced from Commercially Available Powders
by: Borowiecka-Jamrozek J.
Published: (2017-09-01)

A Comparison Study of Ag Composites Prepared by Spark Plasma Sintering and Hot Pressing with Silver-Coated CNTs as the Reinforcements
by: Dongming Jia, et al.
Published: (2019-06-01)

Nickel-graphite composites of variable architecture by graphitization-accompanied spark plasma sintering and hot pressing and their response to phase separation
by: Dudina D.V., et al.
Published: (2015-01-01)

Phase Composition and Microstructure of Hot-Pressing Sintered Ti<sub>2</sub>AlN Metal-Ceramic Bulk Material
by: LIANG Suying, et al.
Published: (2017-06-01)

The Cyclic Oxidation and Hardness Characteristics of Thermally Exposed Titanium Prepared by Inductive Sintering-Assisted Powder Metallurgy
by: Fahamsyah H. Latief, et al.
Published: (2020-02-01)