Biomass pyrolysis oil/diesel blends for a small agricultural engine
The present study reports on an investigation of teak sawdust pyrolysis oil blended with commercial diesel in a small four-stroke compression ignited engine. The engine performance and emissions were evaluated. The teak sawdust pyrolysis oil was obtained from a single-stage fixed bed pyrolysis react...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
SAGE Publishing
2024-01-01
|
| Series: | Energy Exploration & Exploitation |
| Online Access: | https://doi.org/10.1177/01445987231208498 |
| Summary: | The present study reports on an investigation of teak sawdust pyrolysis oil blended with commercial diesel in a small four-stroke compression ignited engine. The engine performance and emissions were evaluated. The teak sawdust pyrolysis oil was obtained from a single-stage fixed bed pyrolysis reactor at 600 °C. Its physicochemical properties were characterized and found to be acceptable for the engine. Teak sawdust pyrolysis oil blends with diesel at the ratios of 10%, 25%, and 50% by mass were utilized. The small engine was tested at constant speeds from 800 to 2600 r/min. 25% teak sawdust pyrolysis oil blend at 2000 r/min was found to have better brake thermal efficiency with lower brake-specific fuel consumption compared to the other teak sawdust pyrolysis oil blends. Meanwhile, the highest engine load was obtained at 50% teak sawdust pyrolysis oil blend and 2600 r/min to be 8 kW. Furthermore, the emissions of CO, CO 2 , and hydrocarbon at 50% teak sawdust pyrolysis oil and 2000 r/min were slightly lower than other teak sawdust pyrolysis oil blends, no NO x detection in tested fuels, moreover, at 2600 speed, the smoke opacities of the fuels show lower than those the others. It was noted that a blend of 25% teak sawdust pyrolysis oil with diesel was suitable for the small engine (at 2000 r/min) in terms of performance and CO, CO 2 , and NO X emission for sustainability in agriculture and rural areas. |
|---|---|
| ISSN: | 0144-5987 2048-4054 |