| Summary: | Conventional single-mode fiber (SMF) Brillouin optical time-domain reflectometry (BOTDR) suffers from a low signal-to-noise ratio (SNR) and severe sensing reliability due to the influence of the stimulated Brillouin scattering threshold and bend loss. In this study, a simple and low-cost distributed sensing structure, with a single-mode input fiber alignment fusion and a 50 μm diameter graded index multimode sensing fiber, is designed, and the SNR characteristic is investigated. Through theoretical derivation and experimental verification, a higher SNR and excellent bending resistance are realized in BOTDR. The experimentally measured improvements in the SNR of the proposed sensing structure over the SMF at the beginning and end of a 5 km fiber are 2.5 dB and 1.3 dB, respectively. The minimum bending radius of the sensing structure is 2.25 mm, which is much better than that of the SMFs. The bidirectional optical losses between the SMF and the 50 μm graded index multimode fiber are measured by a simple experiment system and are 0.106 dB and 1.35 dB, respectively. The temperature-sensing characteristics of the sensing structure are measured by the self-built frequency-shift local heterodyne BOTDR sensor, and the measured temperature sensitivity and accuracy are 0.946 MHz/℃ and 1 ℃, respectively. The design provides a reference for BOTDR with a high SNR and has great potential for structural safety and health monitoring of infrastructures.
|
|---|