| Summary: | This article presents a new methodology of analysis based on a fast-running experimental procedure to characterise the mechanical response of asphalt mortars in terms of stiffness, ductility, and fatigue resistance. This was achieved using the DMA (Dynamic Mechanical Analyser) three-point bending configuration. The study was carried out by considering the employment of different types of fillers such cement and CaCO<sub>3</sub> and different types of binders such as conventional asphalt binder (B35/50) or modifided polymer-modified bitumen (PMB 25/55–65). From the results of this study, the filler was found to have a greater influence on the stiffness and ductility of the asphalt material, while bitumen had a higher effect on the fatigue life of the asphalt mortar. Fatigue life was observed to increase with the use of a polymer-modified binder, while a lower degree of permanent deformation and higher bearing capacity achieved by the use of cement instead of calcium carbonate as active fillers.
|
|---|