Assessment of Steel Subjected to the Thermomechanical Control Process with Respect to Weldability

Assessment of Steel Subjected to the Thermomechanical Control Process with Respect to Weldability

The study is concerned with the assessment of the weldability of steel S700MC subjected to the thermomechanical control process (TMCP) and precipitation hardening and characterised by a high yield point. Appropriate mechanical and plastic properties of steel S700MC were obtained using the thermomech...

Fuld beskrivelse

Bibliografiske detaljer
Hovedforfatter:	Jacek Górka
Format:	Article
Sprog:	English
Udgivet:	MDPI AG 2018-03-01
Serier:	Metals
Fag:	weldability TMCP steel HAZ
Online adgang:	http://www.mdpi.com/2075-4701/8/3/169

Lignende værker

Weldability of Thermomechanically Treated Steels Having a High Yield Point
af: Górka J.
Udgivet: (2015-04-01)

Effect of Thermomechanical Controlled Processing and Quenching & Tempering on the Structure and Properties of Bainite-Martensite Steels
af: G. Mandal, et al.
Udgivet: (2020-05-01)

Influence of Welding Parameters and Filler Material on the Mechanical Properties of HSLA Steel S960MC Welded Joints
af: Miloš Mičian, et al.
Udgivet: (2021-02-01)

Study on impact toughness of TMCP and quenched and tempered high strength steels
af: Jin Jiang, et al.
Udgivet: (2024-07-01)

Weldability investigation of fine-grained S1100QL steel
af: I. Samardžić, et al.
Udgivet: (2016-07-01)

Effect of Nb on microstructure and mechanical properties between base metal and high heat input coarse-grain HAZ in a Ti-deoxidized low carbon high strength steel
af: Yulong Yang, et al.
Udgivet: (2022-05-01)

Weldability examination of ASTM A 240 S41500 martensitic stainless steel by thermal cycles simulation testings
af: Alberto Velázquez-del Rosario, et al.
Udgivet: (2015-07-01)

Calculation program for steel weldability by considering the heat affected zone (HAZ) width of welded joint
af: Yurianto, et al.
Udgivet: (2020-01-01)

The Weldability of Duplex Stainless-Steel in Structural Components to Withstand Corrosive Marine Environments
af: Iñigo Calderon-Uriszar-Aldaca, et al.
Udgivet: (2020-11-01)

Weldability of New Material Sandwich Steel for Automotive Applications
af: Ihsan Kadhom Abbas Al Naimi
Udgivet: (2017-12-01)

Numerical evaluation of the weldability of the low alloy ferritic steels T/P23 and T/P24
af: Carlos Roberto Xavier, et al.
Udgivet: (2011-03-01)

Friction Weldability of UFG 316L Stainless Steel
af: B. Skowrońska, et al.
Udgivet: (2019-09-01)

Advanced Trends in Metallurgy and Weldability of High-Strength Cold-Resistant and Cryogenic Steels
af: Andrei I. Rudskoi, et al.
Udgivet: (2021-11-01)

Weldability of microalloyed high strength steels TStE 420 and S960QL
af: M. Dunđer, et al.
Udgivet: (2014-07-01)

A review of weldability of carbon steel in arc-based welding processes
af: Oluwasegun S. Odebiyi, et al.
Udgivet: (2019-01-01)

Weldability prediction of high strength steel S960QL after weld thermal cycle simulation
af: M. Dunđer, et al.
Udgivet: (2014-10-01)

Effect of Coiling Temperature on Microstructures and Precipitates in High-Strength Low-Alloy Pipeline Steel after Heavy Reduction during a Six-Pass Rolling Thermo-Mechanical Controlled Process
af: Yicong Lei, et al.
Udgivet: (2024-02-01)

Weldability and Lamellar Tearing Susceptibility of High-Strength SN 490C Steel Plates
af: Donghyun Van, et al.
Udgivet: (2019-05-01)

Weldability of Additively Manufactured Powder Bed Fusion 316L Stainless Steel Using Arc and Laser Welding
af: Koen Faes, et al.
Udgivet: (2024-03-01)

Effects of hydrogen upon the properties of thermo mechanical controlled process (TMCP) steel
af: T. Tomić, et al.
Udgivet: (2016-01-01)

Weldability investigation on real welded plates of fine-grained high-strength steel S960QL
af: I. Samardžić, et al.
Udgivet: (2017-01-01)

Accelerated weldability investigation of TStE 420 steel by weld thermal cycle simulation
af: I. Samardžić, et al.
Udgivet: (2013-10-01)

Simultaneous Improvement in Mechanical Properties and Fatigue Crack Propagation Resistance of Low Carbon Offshore Structural Steel EH36 by Cu–Cr Microalloying
af: Xingdong Peng, et al.
Udgivet: (2021-11-01)

Weldability of ductile cast iron using AISI-316L stainless steel ER rod
af: Javier Cárcel Carrasco, et al.
Udgivet: (2022-10-01)

Assessment of the Effect of Residual Stresses Arising in the HAZ of Welds on the Fatigue Life of S700MC Steel
af: Šárka Bukovská, et al.
Udgivet: (2022-11-01)

Improvement of Weldability of Hot-Dip Galvanized Steel by Anti-Galvanizing Coating with Si-Fe-Al Oxide-Based Micropowder
af: Seong-Min So, et al.
Udgivet: (2023-03-01)

Effect of tempering on the microstructure and properties of a new multi-functional 460 MPa Grade construction structural steel
af: Zhenye Chen, et al.
Udgivet: (2022-05-01)

Grain size distribution after similar and dissimilar gas tungsten arc welding of a ferritic stainless steel
af: Ranjbarnodeh E., et al.
Udgivet: (2015-01-01)

Phase Transformation Crystallography in Pipeline HSLA Steel after TMCP
af: Mikhail L. Lobanov, et al.
Udgivet: (2023-06-01)

Weldability and Damage Evaluations of Fresh-to-Aged Reformer Furnace Tubes
af: Chengming Fuyang, et al.
Udgivet: (2021-05-01)

Microstructural Evolution in a 0.09% Niobium Low Carbon Steel during Controlled Hot Deformation
af: E. Pineda Martínez, et al.
Udgivet: (2024-02-01)

Achieving 2.2 GPa ultra-high strength in low-alloy steel using a direct quenching and partitioning process
af: Niu, Gang, et al.
Udgivet: (2024)

Microstructure Characteristics and Mechanical Properties of Flash Butt Welded 590 MPa V-N Microalloyed Heavy-Duty Truck Wheel Steel
af: Cairu Gao, et al.
Udgivet: (2023-03-01)

A Study on the Effect of Current Waveform on Intermetallics Formation and the Weldability of Dissimilar Materials Welded Joints (AA5052 Alloy—GI Steel) in AC Pulse GMAW
af: Seong Min Hong, et al.
Udgivet: (2021-03-01)

Comparative study of TIG and SMAW root welding passes on ductile iron cast weldability
af: J. Cárcel-Carrasco, et al.
Udgivet: (2017-01-01)

Tailoring Weldability for Microstructures in Laser-Welded Near-α Titanium Alloy: Insights on Mechanical Properties
af: Shiwei Zhang, et al.
Udgivet: (2024-06-01)

The Effect of Friction Stir Welding Parameters on the Weldability of Aluminum Alloys with Similar and Dissimilar Metals: Review
af: Wazir Hassan Khalafe, et al.
Udgivet: (2022-12-01)

Weldable structural steels
af: 8096 British Standards Institution

Experimental and numerical investigation on cold cracking susceptibility of naval grade high strength steel welds for lightweight shipbuilding structures
af: Mikhail Ivanov, et al.
Udgivet: (2024-07-01)

Thermal distortion analysis method for TMCP steel structures using shell element
af: Yunsok Ha, et al.
Udgivet: (2009-12-01)