Assessment of Steel Subjected to the Thermomechanical Control Process with Respect to Weldability

Assessment of Steel Subjected to the Thermomechanical Control Process with Respect to Weldability

The study is concerned with the assessment of the weldability of steel S700MC subjected to the thermomechanical control process (TMCP) and precipitation hardening and characterised by a high yield point. Appropriate mechanical and plastic properties of steel S700MC were obtained using the thermomech...

Mô tả đầy đủ

Chi tiết về thư mục
Tác giả chính:	Jacek Górka
Định dạng:	Bài viết
Ngôn ngữ:	English
Được phát hành:	MDPI AG 2018-03-01
Loạt:	Metals
Những chủ đề:	weldability TMCP steel HAZ
Truy cập trực tuyến:	http://www.mdpi.com/2075-4701/8/3/169

Những quyển sách tương tự

Weldability of Thermomechanically Treated Steels Having a High Yield Point
Bằng: Górka J.
Được phát hành: (2015-04-01)

Effect of Thermomechanical Controlled Processing and Quenching & Tempering on the Structure and Properties of Bainite-Martensite Steels
Bằng: G. Mandal, et al.
Được phát hành: (2020-05-01)

Influence of Welding Parameters and Filler Material on the Mechanical Properties of HSLA Steel S960MC Welded Joints
Bằng: Miloš Mičian, et al.
Được phát hành: (2021-02-01)

Study on impact toughness of TMCP and quenched and tempered high strength steels
Bằng: Jin Jiang, et al.
Được phát hành: (2024-07-01)

Weldability investigation of fine-grained S1100QL steel
Bằng: I. Samardžić, et al.
Được phát hành: (2016-07-01)

Effect of Nb on microstructure and mechanical properties between base metal and high heat input coarse-grain HAZ in a Ti-deoxidized low carbon high strength steel
Bằng: Yulong Yang, et al.
Được phát hành: (2022-05-01)

Weldability examination of ASTM A 240 S41500 martensitic stainless steel by thermal cycles simulation testings
Bằng: Alberto Velázquez-del Rosario, et al.
Được phát hành: (2015-07-01)

Calculation program for steel weldability by considering the heat affected zone (HAZ) width of welded joint
Bằng: Yurianto, et al.
Được phát hành: (2020-01-01)

The Weldability of Duplex Stainless-Steel in Structural Components to Withstand Corrosive Marine Environments
Bằng: Iñigo Calderon-Uriszar-Aldaca, et al.
Được phát hành: (2020-11-01)

Weldability of New Material Sandwich Steel for Automotive Applications
Bằng: Ihsan Kadhom Abbas Al Naimi
Được phát hành: (2017-12-01)

Numerical evaluation of the weldability of the low alloy ferritic steels T/P23 and T/P24
Bằng: Carlos Roberto Xavier, et al.
Được phát hành: (2011-03-01)

Friction Weldability of UFG 316L Stainless Steel
Bằng: B. Skowrońska, et al.
Được phát hành: (2019-09-01)

Advanced Trends in Metallurgy and Weldability of High-Strength Cold-Resistant and Cryogenic Steels
Bằng: Andrei I. Rudskoi, et al.
Được phát hành: (2021-11-01)

Weldability of microalloyed high strength steels TStE 420 and S960QL
Bằng: M. Dunđer, et al.
Được phát hành: (2014-07-01)

A review of weldability of carbon steel in arc-based welding processes
Bằng: Oluwasegun S. Odebiyi, et al.
Được phát hành: (2019-01-01)

Weldability prediction of high strength steel S960QL after weld thermal cycle simulation
Bằng: M. Dunđer, et al.
Được phát hành: (2014-10-01)

Effect of Coiling Temperature on Microstructures and Precipitates in High-Strength Low-Alloy Pipeline Steel after Heavy Reduction during a Six-Pass Rolling Thermo-Mechanical Controlled Process
Bằng: Yicong Lei, et al.
Được phát hành: (2024-02-01)

Weldability and Lamellar Tearing Susceptibility of High-Strength SN 490C Steel Plates
Bằng: Donghyun Van, et al.
Được phát hành: (2019-05-01)

Weldability of Additively Manufactured Powder Bed Fusion 316L Stainless Steel Using Arc and Laser Welding
Bằng: Koen Faes, et al.
Được phát hành: (2024-03-01)

Effects of hydrogen upon the properties of thermo mechanical controlled process (TMCP) steel
Bằng: T. Tomić, et al.
Được phát hành: (2016-01-01)

Weldability investigation on real welded plates of fine-grained high-strength steel S960QL
Bằng: I. Samardžić, et al.
Được phát hành: (2017-01-01)

Accelerated weldability investigation of TStE 420 steel by weld thermal cycle simulation
Bằng: I. Samardžić, et al.
Được phát hành: (2013-10-01)

Simultaneous Improvement in Mechanical Properties and Fatigue Crack Propagation Resistance of Low Carbon Offshore Structural Steel EH36 by Cu–Cr Microalloying
Bằng: Xingdong Peng, et al.
Được phát hành: (2021-11-01)

Weldability of ductile cast iron using AISI-316L stainless steel ER rod
Bằng: Javier Cárcel Carrasco, et al.
Được phát hành: (2022-10-01)

Assessment of the Effect of Residual Stresses Arising in the HAZ of Welds on the Fatigue Life of S700MC Steel
Bằng: Šárka Bukovská, et al.
Được phát hành: (2022-11-01)

Improvement of Weldability of Hot-Dip Galvanized Steel by Anti-Galvanizing Coating with Si-Fe-Al Oxide-Based Micropowder
Bằng: Seong-Min So, et al.
Được phát hành: (2023-03-01)

Effect of tempering on the microstructure and properties of a new multi-functional 460 MPa Grade construction structural steel
Bằng: Zhenye Chen, et al.
Được phát hành: (2022-05-01)

Grain size distribution after similar and dissimilar gas tungsten arc welding of a ferritic stainless steel
Bằng: Ranjbarnodeh E., et al.
Được phát hành: (2015-01-01)

Phase Transformation Crystallography in Pipeline HSLA Steel after TMCP
Bằng: Mikhail L. Lobanov, et al.
Được phát hành: (2023-06-01)

Weldability and Damage Evaluations of Fresh-to-Aged Reformer Furnace Tubes
Bằng: Chengming Fuyang, et al.
Được phát hành: (2021-05-01)

Microstructural Evolution in a 0.09% Niobium Low Carbon Steel during Controlled Hot Deformation
Bằng: E. Pineda Martínez, et al.
Được phát hành: (2024-02-01)

Achieving 2.2 GPa ultra-high strength in low-alloy steel using a direct quenching and partitioning process
Bằng: Niu, Gang, et al.
Được phát hành: (2024)

Microstructure Characteristics and Mechanical Properties of Flash Butt Welded 590 MPa V-N Microalloyed Heavy-Duty Truck Wheel Steel
Bằng: Cairu Gao, et al.
Được phát hành: (2023-03-01)

A Study on the Effect of Current Waveform on Intermetallics Formation and the Weldability of Dissimilar Materials Welded Joints (AA5052 Alloy—GI Steel) in AC Pulse GMAW
Bằng: Seong Min Hong, et al.
Được phát hành: (2021-03-01)

Comparative study of TIG and SMAW root welding passes on ductile iron cast weldability
Bằng: J. Cárcel-Carrasco, et al.
Được phát hành: (2017-01-01)

Tailoring Weldability for Microstructures in Laser-Welded Near-α Titanium Alloy: Insights on Mechanical Properties
Bằng: Shiwei Zhang, et al.
Được phát hành: (2024-06-01)

The Effect of Friction Stir Welding Parameters on the Weldability of Aluminum Alloys with Similar and Dissimilar Metals: Review
Bằng: Wazir Hassan Khalafe, et al.
Được phát hành: (2022-12-01)

Weldable structural steels
Bằng: 8096 British Standards Institution

Experimental and numerical investigation on cold cracking susceptibility of naval grade high strength steel welds for lightweight shipbuilding structures
Bằng: Mikhail Ivanov, et al.
Được phát hành: (2024-07-01)

Thermal distortion analysis method for TMCP steel structures using shell element
Bằng: Yunsok Ha, et al.
Được phát hành: (2009-12-01)