| Summary: | A novel methodology is introduced for designing bespoke homogeneous and graded index lenses for enhancing the gain of travelling wave antenna arrays (TWAs). 3D-printed lenses in the literature are majorly explored with standing wave antennas (SWAs) such as a microstrip or a horn antenna for gain enhancement. As there is progressively less power radiated from each slot in a TWA, as well as the successive phase delay between slots, the existing lens design approaches used for SWAs is not optimal for TWAs. Accordingly, we present a new approach of introducing a curvature to the lens that is derived from studying the power radiation profile of each slot of the TWA. This new methodology is demonstrated on a dielectric filled waveguide (DFW) slot array antenna operating at 26 – 30 GHz band. An optimized dielectric graded lens and an optimized homogeneous lens have both been designed, fabricated, and measured with the DFW slot array. The new lens demonstrated a gain enhancement of more than 7 dB compared to less than 4 dB with conventional dielectric lenses. The proposed lens theory has been further verified with a bespoke optimized lens for a periodic stub-loaded microstrip leaky-wave antenna with a beam-scanning of 65°. Design rules are included that can be applied for any TWA.
|
|---|