| Summary: | Airport runway pavements often undergo the direct impact of aircraft landings. For the purposes of designing the structure, it is of great importance to know about the dynamic response of the pavement and its behavior under impact loading. However, the dynamics and failure mechanisms of reinforced recycled aggregate concrete pavements subjected to impact loading are seldom explored in the literature. For this purpose, four reinforced recycled aggregate concrete pavements with different thickness and ratios of reinforcement, and one reinforced normal concrete pavement, were manufactured and tested under impact loading using the drop-weight impact frame system. The impact force characteristics, crack patterns, deformation responses, and strain developments of reinforced concrete pavements subjected to impact loading were evaluated and compared. The above-mentioned study revealed that with an increase in the reinforcement ratio, both the deformation and the steel strain were reduced. Increasing the thickness would reduce the degree of damage and the impact force of reinforced concrete pavement (RCP) but increase the deformation. The results show that under the same compressive strength, the dynamic performance of the reinforced recycled aggregate concrete pavement was worse than that of the reinforced normal concrete pavement because of its lower elastic modulus and weaker interfacial transition zone. The dynamic performance of reinforced recycled aggregate concrete pavement could be improved by increasing the thickness and reinforcement ratio. The use of recycled aggregate concrete (RAC) in RCP is a technically feasible application of the material within the scope of this experimental study.
|
|---|