On Some Mechanical Properties and Wear Behavior of Sintered Bronze Based Composites Reinforced with Some Aluminides Microadditives
In the paper, the changes in some mechanical properties and wear behavior of CuSn10 sintered bronze and MMCs based on this bronze reinforced with composite ultrafine aluminide powders FeAl/15 % Al 2 O 3 , NiAl/15 % Al 2 O 3 and Ti-46Al-8Cr are described. It was observed that the presence of alumini...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
University of Zielona Góra
2017-05-01
|
| Series: | International Journal of Applied Mechanics and Engineering |
| Subjects: | |
| Online Access: | https://www.ijame-poland.com/On-Some-Mechanical-Properties-and-Wear-Behavior-of-Sintered-Bronze-Based-Composites,167055,0,2.html |
| Summary: | In the paper, the changes in some mechanical properties and wear behavior of CuSn10 sintered bronze and MMCs based on this bronze reinforced with composite ultrafine aluminide powders FeAl/15 % Al 2 O 3 , NiAl/15 % Al 2 O 3 and Ti-46Al-8Cr are described. It was observed that the presence of aluminides in the MMCs leads to an increase in the hardness, but the flexural strength may increase or decrease depending on the type of aluminide. The presence of aluminides in the MMC reduces the wear rate considerably. It is decreased in the direction of FeAl/15 % Al 2 O 3 → NiAl/15 % Al 2 O 3 → Ti-46Al-8Cr aluminides and for the best MMC composition the advantage is about 20 times. In the MMCs wear process, micro-craters are formed on the contact surface and it is the principal reason of a decrease in the wear rate. |
|---|---|
| ISSN: | 1734-4492 2353-9003 |