Experimental Study of the effect of closed cavity wall on buildings cooling loads saving

Experimental Study of the effect of closed cavity wall on buildings cooling loads saving

Show other versions (1)

The experimental study showed the use of closed cavity wall (the thickness of the cavity 5cm) made a percentage reduction in the cooling load caused by heat gain from the wall by (21.5 %) compared with the conventional wall. also the thermal resistance of the closed cavity was an average (0.2 m2.oC/...

Full description

Bibliographic Details
Main Authors:	Qussai Jihad Abdul Ghafour, Bashar Kamil Mahmoud
Format:	Article
Language:	English
Published:	University of Baghdad 2015-01-01
Series:	Journal of Engineering
Online Access:	https://www.jcoeng.edu.iq/index.php/main/article/view/481/414

Similar Items

Experimental Study of the effect of closed cavity wall on buildings cooling loads saving
by: Qussai Jihad Abdul Ghafour, Ass. Prof. Dr., et al.
Published: (2015-01-01)

Experimental Study of the Effect of VentilatedCavity Wall on Building Cooling Load
by: Qussai J. Abdul Ghafour, et al.
Published: (2015-07-01)

Experimental and Theoretical Study of Vacuum Cooling System
by: Ahmed A. M. Saleh, et al.
Published: (2013-09-01)

Experimental Study of the Thermal Performance of Flat Plate Solar Collectors Array by Different Connection Configurations
by: Jafar Mehdi Hassan, et al.
Published: (2015-05-01)

Study of Transient Simulation for Solar Heating System
by: Laith Abdulmonem. Ismael, et al.
Published: (2011-03-01)

A GENERAL VELOCITY PROFILE FOR A LAMINAR BOUNDARY LAYER OVER FLAT PLATE WITH ZERO INCIDENCE
by: Qussai J. Abdul-Ghafour
Published: (2011-10-01)

Experimental Study of the Thermal Performance of Flat Plate Solar Collectors Array by Different Connection Configurations
by: Jafar Mehdi Hassan, Prof. Dr., et al.
Published: (2015-05-01)

Experimental and analytic evaluation of gas-cooled reactor cavity cooling system performance
by: Fu, Kang
Published: (2005)

Effectiveness of cool walls on cooling load and urban temperature in a tropical climate
by: Nazarian, Negin, et al.
Published: (2019)

Study on the cooling energy saving potential of a novel radiative cooling paints in building application
by: Jiang Kaiyu, et al.
Published: (2022-01-01)

Shock Loading of Closed Cell Aluminum Foams in the Presence of an Air Cavity
by: Mahesh Thorat, et al.
Published: (2020-06-01)

Learning Windows For The Cooling Load of The Building
by: Faris M. Roufa
Published: (2005-08-01)

LEARNING WINDOWS FOR THE COOLING LOAD OF THE BUILDING
by: Faris M. Roufa
Published: (2005-03-01)

Passive cooling wall system for buildings in tropical region /
by: Muhammad Fakharie Che Pee, 1984-, author 208544, et al.
Published: (2016)

Thermal and experimental analysis of cross-flow closed cooling tower
by: M.A. Hassab, et al.
Published: (2023-04-01)

Building energy savings by green roofs and cool roofs in current and future climates
by: Siqi Jia, et al.
Published: (2024-04-01)

Energy and cost savings of cool coatings for multifamily buildings in U.S. climate zones
by: Xiao Nie, et al.
Published: (2024-02-01)

Stiffness of Experimentally Tested Horizontally Loaded Walls and Timber-Framed Modular Building
by: Czesław Miedziałowski, et al.
Published: (2023-09-01)

Effects Of Opening On The Behaviour Of Axially Loaded Firedclay Single Leaf Wall
by: Mohammed, Bashar S.
Published: (2006)

Cavity cooling of an atomic array
by: O S Mishina
Published: (2014-01-01)

Cavity Cooling of Many Atoms
by: Hosseini, Mahdi, et al.
Published: (2017)

Passively Maintained Closed Cavity Façade—Experimental Validation of the Mathematical Thermal Model
by: Zoran Veršić, et al.
Published: (2023-08-01)

Improving present-day energy savings among green building sector in Malaysia using benefit transfer approach: Cooling and lighting loads
by: Ab. Azis, Shazmin Shareena
Published: (2021)

Cooling and Energy-Saving Performance of Different Green Wall Design: A Simulation Study of a Block
by: Jiayu Li, et al.
Published: (2019-07-01)

THEORETICAL AND EXPERIMENTAL STUDY ON THERMAL PERFORMANCE OF CLOSED WET COOLING TOWER
by: Najim A. Jassim
Published: (2011-12-01)

Building energy savings using high-albedo-high-emittance (cool) roof materials
by: Zingre, Kishor Tarachand
Published: (2015)

The Effect of Air leakage through the Air Cavities of Building Walls on Mold Growth Risks
by: Yonghui Li, et al.
Published: (2020-03-01)

Building energy analysis using cooling load factor/cooling load temperature different (CLF/CLTD)
by: Mohd Firdaus, Musa
Published: (2010)

Experimental research on the performance of BIPV/T system with water-cooled wall
by: Minghui Ge, et al.
Published: (2022-11-01)

Experimental Study of Natural Convection in a Closed Cavity (Static Type Domestic Fridge)
by: Maryem Kanaan Adnan, et al.
Published: (2021-10-01)

Energy Savings and Carbon Emission Mitigation Prospective of Building’s Glazing Variety, Window-to-Wall Ratio and Wall Thickness
by: Saboor Shaik, et al.
Published: (2021-12-01)

The effect of building form on cooling load in hot and humid climate /
by: Wan Sharizatul Suraya Wan Mohamed Rashdi, 1982, author 604528, et al.
Published: (2016)

The effect of various types of building roof materials on the cooling load
by: Ajeel Aljebur, Raheem Kadhim
Published: (2015)

The effect of building form on cooling load in hot and humid climate
by: Wan Mohamed Rashdi, Wan Shahrizatul Suraya
Published: (2016)

Effect of Window Over-Hang in Iraqi Building on Cooling Load
by: Farag Nazar
Published: (2007-09-01)

Cooling and trapping in cavity quantum electrodynamics
by: Rempe, G, et al.
Published: (2005)

Terahertz cavity cooling for cuprate superconductors
by: Denny, S
Published: (2015)

Optomechanical Cavity Cooling of an Atomic Ensemble
by: Schleier-Smith, Monika Helene, et al.
Published: (2012)

Experimental and Simulation Study on the Performance of Counter Flow Closed Cooling Tower Systems
by: Budihardjo, et al.
Published: (2015-07-01)

Brickwork - cavity walls [kasetvideo]
Published: ([195)