Influence of Thermal Annealing Temperatures on Powder Mould Effectiveness to Avoid Deformations in ABS and PLA 3D-Printed Parts

Influence of Thermal Annealing Temperatures on Powder Mould Effectiveness to Avoid Deformations in ABS and PLA 3D-Printed Parts

Fused deposition modelling (FDM)-printed parts can be treated with various post-processes to improve their mechanical properties, dimensional accuracy and surface finish. Samples of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) parts are treated with annealing to study a ceramic po...

Full description

Bibliographic Details
Main Authors:	Joaquín Lluch-Cerezo, María Desamparados Meseguer, Juan Antonio García-Manrique, Rut Benavente
Format:	Article
Language:	English
Published:	MDPI AG 2022-06-01
Series:	Polymers
Subjects:	fused deposition modelling (FDM) annealing powder mould flexural strength acrylonitrile butadiene styrene (ABS) polylactic acid (PLA)
Online Access:	https://www.mdpi.com/2073-4360/14/13/2607

Similar Items

Effect of a Powder Mould in the Post-Process Thermal Treatment of ABS Parts Manufactured with FDM Technology
by: Joaquín Lluch-Cerezo, et al.
Published: (2021-07-01)

Numerical Investigation of Deposition Characteristics of PLA on an ABS Plate Using a Material Extrusion Process
by: Bih-Lii Chua, et al.
Published: (2021-06-01)

Analyzing the Impact of Print Parameters on Dimensional Variation of ABS specimens printed using Fused Deposition Modelling (FDM)
by: Krishna Mohan Agarwal, et al.
Published: (2022-01-01)

Failures and Flaws in Fused Deposition Modeling (FDM) Additively Manufactured Polymers and Composites
by: Maggie Baechle-Clayton, et al.
Published: (2022-07-01)

Optimization of Fatigue Performance of FDM ABS and Nylon Printed Parts
by: Andrey Yankin, et al.
Published: (2023-01-01)

Characterization of ABS specimens produced via the 3D printing technology for drone structural components
by: Ferro Carlo Giovanni, et al.
Published: (2016-07-01)

Effects of 3D Printing Parameters on Mechanical Properties of ABS Samples
by: Mohd Nazri Ahmad, et al.
Published: (2023-11-01)

Recent Advances in Adhesive Bonding of 3D-Printed Parts and Methods to Increase their Mechanical Performance
by: D. K. K. Cavalcanti, et al.
Published: (2023-12-01)

Calculation of measurement uncertainty for plastic (ABS) material in flexural testing
by: Gunay A., et al.
Published: (2013-01-01)

Mechanical, thermal and physical characteristics of oil palm (Elaeis Guineensis) fiber reinforced thermoplastic composites for FDM – Type 3D printer
by: Mohd Nazri Ahmad, et al.
Published: (2023-03-01)

Novel Drone Design Using an Optimization Software with 3D Model, Simulation, and Fabrication in Drone Systems Research
by: Ahmed. O. MohamedZain, et al.
Published: (2022-04-01)

Examination of Polymer Blends by AFM Phase Images
by: Enrico Werner, et al.
Published: (2023-04-01)

Design and Development of Hot Vapour Polishing System and Optimization of It’s Process Parameters for FDM Printed Parts
by: Sunish Ram Kishore, et al.
Published: (2022-12-01)

Performance evaluation of a full-scale ABS resin manufacturing wastewater treatment plant: a case study in Tabriz Petrochemical Complex
by: Mohammad Shakerkhatibi, et al.
Published: (2016-08-01)

The Mechanical and Physical Properties of 3D-Printed Materials Composed of ABS-ZnO Nanocomposites and ABS-ZnO Microcomposites
by: Nectarios Vidakis, et al.
Published: (2020-06-01)

Effect of Reinforcements and 3-D Printing Parameters on the Microstructure and Mechanical Properties of Acrylonitrile Butadiene Styrene (ABS) Polymer Composites
by: Ved S. Vakharia, et al.
Published: (2022-05-01)

Tensile Properties of Four Types of ABS Lattice Structures—A Comparative Study
by: Katarina Monkova, et al.
Published: (2023-10-01)

Influence of Infill Pattern on Mechanical Behavior of Polymeric and Composites Specimens Manufactured Using Fused Filament Fabrication Technology
by: María Jesús Martín, et al.
Published: (2021-08-01)

Mechanical Properties of 3D-Printed Acrylonitrile–Butadiene–Styrene TiO<sub>2</sub> and ATO Nanocomposites
by: Nectarios Vidakis, et al.
Published: (2020-07-01)

Microwave Characterization of Conductive PLA and Its Application to a 12 to 18 GHz 3-D Printed Rotary Vane Attenuator
by: Enrique Marquez-Segura, et al.
Published: (2021-01-01)

Evaluation on Material Anisotropy of Acrylonitrile Butadiene Styrene Printed via Fused Deposition Modelling
by: Nima Zohdi, et al.
Published: (2024-02-01)

Comparative LCA of conventional manufacturing vs. additive manufacturing: the case of injection moulding for recycled polymers
by: Fabricio Leon Garcia, et al.
Published: (2021-11-01)

Optimization of fused filament fabrication system by response surface method
by: Kandananond Karin
Published: (2020-01-01)

High-performance blow spun waste-acrylonitrile butadiene styrene (ABS) fibrous membrane for air filter
by: Muhammad Miftahul Munir, et al.
Published: (2022-05-01)

Variability analysis of ABS solid fuel manufactured by fused deposition modeling for hybrid rocket motors
by: J. A. Urrego P., et al.
Published: (2021-06-01)

Influence of Infill Pattern on 3D-Printed Parts Compression Strength
by: Damir Godec, et al.
Published: (2022-01-01)

Modification of Surface Hydrophobicity of PLA/PE and ABS/PE Polymer Blends by ICP Etching and CF<sub>x</sub> Coating
by: Vedrana Lovinčić Milovanović, et al.
Published: (2020-12-01)

On Laminated Object Manufactured FDM-Printed ABS/TPU Multimaterial Specimens: An Insight into Mechanical and Morphological Characteristics
by: S. Kumar, et al.
Published: (2022-09-01)

Additive manufacturing (3D printing) in technical fashion industry applications
by: Di̇lek Ezgi, et al.
Published: (2021-01-01)

Mechanical Reinforcement of ABS with Optimized Nano Titanium Nitride Content for Material Extrusion 3D Printing
by: Nectarios Vidakis, et al.
Published: (2023-02-01)

Proposal of the Tubular Daylight System Using Acrylonitrile Butadiene Styrene (ABS) Metalized with Aluminum for Reflective Tube Structure
by: Anderson Diogo Spacek, et al.
Published: (2018-01-01)

Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid
by: Aravind Dhandapani, et al.
Published: (2023-03-01)

Fabrication and Characterization of Aluminum Nanoparticle-Reinforced Composites
by: Seongbeom Jeong, et al.
Published: (2020-11-01)

Pattern and filament optimization for 3D-printed reinforcements to enhance the flexural behavior of cement-based composites
by: Özgür Özdilli, et al.
Published: (2023-03-01)

Effects of poly(styrene-co-maleic anhydride) on the performance of LGF/TPU/ABS composites
by: Zhou Wulei, et al.
Published: (2016-09-01)

Greener electrochemical plating of ABS polymer with unprecedented adhesion via hierarchical micro–nanotexturing
by: Ruslan Melentiev, et al.
Published: (2023-05-01)

Construção de equipamento de baixo custo para enrolar filamentos de impressoras 3D
by: Diego C. de Andrade, et al.

Natural rubber to replace acrylonitrile butadiene styrene in polycarbonate blends and composites
by: Patiparn Boonruam, et al.
Published: (2021-05-01)

Mechanical and dynamic mechanical behavior of 3D printed waste slate particles filled acrylonitrile butadiene styrene composites
by: Imtiyaz Khan, et al.
Published: (2024-02-01)

Resistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites
by: Jie Zhang, et al.
Published: (2017-01-01)