Research on key factors of satellite laser pointing calibration based on terrain matching: a case of GF-7 satellite
The satellite laser geometry calibration method based on terrain matching (terrain matching calibration) has been extensively employed in satellite laser geometry calibration for its simplicity and lack of need for ground probes. In this study, the key factors for the accuracy of the above-mentioned...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Taylor & Francis Group
2024-01-01
|
| Series: | Geocarto International |
| Subjects: | |
| Online Access: | https://www.tandfonline.com/doi/10.1080/10106049.2024.2329688 |
| Summary: | The satellite laser geometry calibration method based on terrain matching (terrain matching calibration) has been extensively employed in satellite laser geometry calibration for its simplicity and lack of need for ground probes. In this study, the key factors for the accuracy of the above-mentioned calibration method, i.e. namely the terrain slope and the number of laser points, are examined with the GaoFen-7 (GF-7) satellite as an example. Terrain is classified into six levels in according with the slope classification standards, i.e. Flat (<2°), Micro-slope (2°–5°), Gentle-slope (5°–15°), Moderate-slope (15°–25°), Slope (25°–35°) and Steep-slope (35°–55°). Moreover, a different number of laser points are randomly selected from each the respective terrain slope for calibration. The accuracy of calibration is verified using the true laser pointing obtained based on the ground detector calibration method. As indicated by the experimental results, the terrain matching calibration achieves the optimal experimental conditions when there are over 50 laser points with a terrain slope greater than 15°, or there exist over 20 laser points with a terrain slope greater than 25°. In both cases, the laser pointing accuracy after calibration can exceed 3 arc seconds. This study can provide technical guidance for high-precision terrain matching calibration. |
|---|---|
| ISSN: | 1010-6049 1752-0762 |