| Summary: | A low impedance high power microwave (HPM) driver is designed, which can be used in studying multi-gigawatt HPM devices such as the magnetically insulated transmission line oscillator (MILO), based on a helical pulse forming line (PFL) and the Tesla pulse transformer technology. The co-axial PFL is insulated by ethanol–water mixture, whose dielectric constant can be adjusted; and the helical line increases the output pulse width as well as the impedance to make a better match with the load. By the optimal combination of PFL charging voltage and output switch working voltage, the reliability of the PFL can be improved. The Tesla transformer has partial magnetic cores to increase the coupling coefficient and is connected like an autotransformer to increase the voltage step-up ratio. The primary capacitor of the transformer is charged by a high voltage constant current power supply and discharged by a triggered switch. A transmission line is installed between the PFL and the HPM load, to further increase the load voltage. A ceramic disk vacuum interface is used for improving the vacuum of the HPM tube. The experiments show that the driver can operate at 30 GW peak power, 75 ns pulse width and 5 Hz repetition rate.
|
|---|