Dataset with press forming results of unidirectional thermoplastic composite laminates including in-plane deformation data for validation of forming simulations
Truncated hemisphere parts were press formed with two commercially available unidirectional thermoplastic composite materials, namely Toray TC1225 and Solvay APC. The width and layup of the laminates were varied to influence the wrinkling severity, to trigger various deformation mechanisms and to in...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Elsevier
2024-04-01
|
| Series: | Data in Brief |
| Subjects: | |
| Online Access: | http://www.sciencedirect.com/science/article/pii/S2352340924000726 |
| _version_ | 1797256347876589568 |
|---|---|
| author | Dennis Brands Václav Vomáčko Wouter Grouve Sebastiaan Wijskamp Remko Akkerman |
| author_facet | Dennis Brands Václav Vomáčko Wouter Grouve Sebastiaan Wijskamp Remko Akkerman |
| author_sort | Dennis Brands |
| collection | DOAJ |
| description | Truncated hemisphere parts were press formed with two commercially available unidirectional thermoplastic composite materials, namely Toray TC1225 and Solvay APC. The width and layup of the laminates were varied to influence the wrinkling severity, to trigger various deformation mechanisms and to influence the amount of in-plane deformation. A total of eight layup/width combinations were selected and formed in triplicate for both materials, resulting in the analysis of 48 parts in total. The wrinkling defects are clearly observed due to an intentional gap between the forming tools at the end of forming. Further, a dot pattern with a resolution of 3 mm was applied to the laminates prior to forming using a photoresist mask, sandblasting and heat resistant spray paint. The locations of the dots before and after forming were measured using photogrammetry and are provided in the dataset as a triangular mesh including a precision metric. Matlab functions, bundled with this dataset, allow for the reproduction of the deformation calculations and averages. Lastly, a Matlab App (GUI) is provided for easy visualization of the data. This dataset can serve as a reference for validation of composite forming simulations. |
| first_indexed | 2024-03-08T03:35:14Z |
| format | Article |
| id | doaj.art-650a43360e0840dfb02278c927c5ffbc |
| institution | Directory Open Access Journal |
| issn | 2352-3409 |
| language | English |
| last_indexed | 2024-04-24T22:20:18Z |
| publishDate | 2024-04-01 |
| publisher | Elsevier |
| record_format | Article |
| series | Data in Brief |
| spelling | doaj.art-650a43360e0840dfb02278c927c5ffbc2024-03-20T06:09:42ZengElsevierData in Brief2352-34092024-04-0153110099Dataset with press forming results of unidirectional thermoplastic composite laminates including in-plane deformation data for validation of forming simulationsDennis Brands0Václav Vomáčko1Wouter Grouve2Sebastiaan Wijskamp3Remko Akkerman4Production Technology, Faculty of Engineering Technology, University of Twente, Drienerlolaan 5, 7522 NB Enschede, the Netherlands; ThermoPlastic Composites Research Center (TPRC), Palatijn 15, 7521 PN Enschede, the Netherlands; Corresponding authors.ThermoPlastic Composites Research Center (TPRC), Palatijn 15, 7521 PN Enschede, the Netherlands; Institute of New Technologies and Applied Informatics, Faculty of Mechatronics, Informatics and Interdisciplinary Studies, Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech RepublicProduction Technology, Faculty of Engineering Technology, University of Twente, Drienerlolaan 5, 7522 NB Enschede, the Netherlands; Corresponding authors.ThermoPlastic Composites Research Center (TPRC), Palatijn 15, 7521 PN Enschede, the NetherlandsProduction Technology, Faculty of Engineering Technology, University of Twente, Drienerlolaan 5, 7522 NB Enschede, the Netherlands; ThermoPlastic Composites Research Center (TPRC), Palatijn 15, 7521 PN Enschede, the NetherlandsTruncated hemisphere parts were press formed with two commercially available unidirectional thermoplastic composite materials, namely Toray TC1225 and Solvay APC. The width and layup of the laminates were varied to influence the wrinkling severity, to trigger various deformation mechanisms and to influence the amount of in-plane deformation. A total of eight layup/width combinations were selected and formed in triplicate for both materials, resulting in the analysis of 48 parts in total. The wrinkling defects are clearly observed due to an intentional gap between the forming tools at the end of forming. Further, a dot pattern with a resolution of 3 mm was applied to the laminates prior to forming using a photoresist mask, sandblasting and heat resistant spray paint. The locations of the dots before and after forming were measured using photogrammetry and are provided in the dataset as a triangular mesh including a precision metric. Matlab functions, bundled with this dataset, allow for the reproduction of the deformation calculations and averages. Lastly, a Matlab App (GUI) is provided for easy visualization of the data. This dataset can serve as a reference for validation of composite forming simulations.http://www.sciencedirect.com/science/article/pii/S2352340924000726Carbon fiberManufacturingExperimentPhotogrammetryWrinkling |
| spellingShingle | Dennis Brands Václav Vomáčko Wouter Grouve Sebastiaan Wijskamp Remko Akkerman Dataset with press forming results of unidirectional thermoplastic composite laminates including in-plane deformation data for validation of forming simulations Data in Brief Carbon fiber Manufacturing Experiment Photogrammetry Wrinkling |
| title | Dataset with press forming results of unidirectional thermoplastic composite laminates including in-plane deformation data for validation of forming simulations |
| title_full | Dataset with press forming results of unidirectional thermoplastic composite laminates including in-plane deformation data for validation of forming simulations |
| title_fullStr | Dataset with press forming results of unidirectional thermoplastic composite laminates including in-plane deformation data for validation of forming simulations |
| title_full_unstemmed | Dataset with press forming results of unidirectional thermoplastic composite laminates including in-plane deformation data for validation of forming simulations |
| title_short | Dataset with press forming results of unidirectional thermoplastic composite laminates including in-plane deformation data for validation of forming simulations |
| title_sort | dataset with press forming results of unidirectional thermoplastic composite laminates including in plane deformation data for validation of forming simulations |
| topic | Carbon fiber Manufacturing Experiment Photogrammetry Wrinkling |
| url | http://www.sciencedirect.com/science/article/pii/S2352340924000726 |
| work_keys_str_mv | AT dennisbrands datasetwithpressformingresultsofunidirectionalthermoplasticcompositelaminatesincludinginplanedeformationdataforvalidationofformingsimulations AT vaclavvomacko datasetwithpressformingresultsofunidirectionalthermoplasticcompositelaminatesincludinginplanedeformationdataforvalidationofformingsimulations AT woutergrouve datasetwithpressformingresultsofunidirectionalthermoplasticcompositelaminatesincludinginplanedeformationdataforvalidationofformingsimulations AT sebastiaanwijskamp datasetwithpressformingresultsofunidirectionalthermoplasticcompositelaminatesincludinginplanedeformationdataforvalidationofformingsimulations AT remkoakkerman datasetwithpressformingresultsofunidirectionalthermoplasticcompositelaminatesincludinginplanedeformationdataforvalidationofformingsimulations |