| Summary: | Chromated copper arsenate-treated (cca) wood disposal faces environmental restrictions due to its toxicity, heavy metal leaching in storage sites, and greenhouse gas emissions during incineration. Thus, finding new management methods for this contaminated wood at the end of life is crucial. This study evaluated the effect of pyrolysis temperature (300, 400, and 500 °C), particle size, biochar yield, and the behavior of arsenic (As), chromium (Cr), and copper (Cu) during treated-wood pyrolysis. The highest biochar yield was obtained at 300 °C for fine particles. The biochar retention of heavy metals decreased with increasing pyrolysis temperature. At 300 °C, the highest biochar As, Cr, and Cu retentions were 76, 91, and 83%. At 500 °C, biochar only retained 43% of the As. Additionally, heavy metal leaching from the biochar exceeded the Environmental Protection Agency’s (EPA) maximum concentration limit of 5 mg/L. High-density polyethylene encapsulation of contaminated biochar reduced the leaching of As, Cr, and Cu by 96, 95, and 91%, respectively. Thus, combining pyrolysis and plastic encapsulation to produce a composite material could be a solution for reducing waste (conversion of CCA-wood into biochar) and for the safe disposal of contaminated wood.
|
|---|