| Summary: | More and more distributed generation (DG) and energy storage (ES) devices are being connected to the distribution network (DN). They have the potential of maintaining a stable supply load during failure periods when using islanding operations. Therefore, DG and ES have capacity value, i.e., improving the power supply capability of the system. However, there are strong fluctuations in DG outputs, and the operations of ES devices have sequential characteristics. The same capacity of DG has different load-bearing capabilities compared to conventional thermal or hydroelectric units. This paper proposes a method for evaluation of power supply capability improvement in DNs. First, the temporal fluctuation in both power source and load demand during fault periods is considered. A DN island partition model considering the secondary power outage constraint is established. Then, a modified genetic algorithm is designed. The complex island partition model is solved to achieve accurate power supply reliability evaluation. And the incremental power supply capability associated to DG and ES devices is calculated. Finally, a case study is conducted on the PG&E 69-bus system to verify the effectiveness of the proposed method. It is found that with a 20% configuration ratio of ES devices, the power supply capability improvement brought about by 6 MW DG can reach about 773 kW.
|
|---|