| Summary: | In this study, the resistance to corrosion of niobium-doped tin dioxide (Nb-doped SnO<sub>2</sub>, NTO) and antimony-doped tin oxide (Sb-doped SnO<sub>2</sub>, ATO) supports has been probed for proton-exchange membrane fuel cell (PEMFC) application. To achieve this goal, ATO or NTO supports with loose-tube (fiber-in-tube) morphology were synthesized using electrospinning and decorated with platinum (Pt) nanoparticles. These cathode catalysts were submitted to two different electrochemical tests, an accelerated stress test following the EU Harmonised Test Protocols for PEMFC in a single cell configuration and an 850 h test in real air-breathing PEMFC systems. In both cases, the dissolution of the doping element was measured either by inductively coupled plasma mass spectrometry (ICP−MS) performed on the exhaust water or by energy dispersive X-ray spectrometry (X-EDS) analysis on ultramicrotomed membrane electrode assembly (MEA), and correlated to the performance losses upon ageing. It appears that the NTO-based support leads to lower performances than the ATO-based one, mainly owing to the low electronic conductivity of NTO. However, in the case of ATO, dissolution of the Sb doping element is non-negligible and represents a major issue from a stability point-of-view.
|
|---|