Leading Edge Device Aerodynamic Optimization
Leading edge devices are conventionally used as aerodynamic devices that enhance performances during landing and in some cases during takeoff. The need to increase the efficiency of the aircrafts has brought the idea of maintaining as much as possible a laminar flow over the wings. This is possible...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
National Institute for Aerospace Research “Elie Carafoli” - INCAS
2015-12-01
|
| Series: | INCAS Bulletin |
| Subjects: | |
| Online Access: | http://bulletin.incas.ro/files/cojocaru__niculescu__pepelea_vol_7_iss_4.pdf |
| Summary: | Leading edge devices are conventionally used as aerodynamic devices that enhance performances during landing and in some cases during takeoff. The need to increase the efficiency of the aircrafts has brought the idea of maintaining as much as possible a laminar flow over the wings. This is possible only when the leading edge of the wings is free from contamination, therefore using the leading edge devices with the additional role of shielding during takeoff. Such a device based on the Krueger flap design is aerodynamically analyzed and optimized. The optimization comprises three steps: first, the positioning of the flap such that the shielding criterion is kept, second, the analysis of the flap size and third, the optimization of the flap shape. The first step is subject of a gradient based optimization process of the position described by two parameters, the position along the line and the deflection angle. For the third step the Adjoint method is used to gain insight on the shape of the Krueger flap that will extend the most the stall limit. All these steps have been numerically performed using Ansys Fluent and the results are presented for the optimized shape in comparison with the baseline configuration. |
|---|---|
| ISSN: | 2066-8201 2247-4528 |