Removal of CO<sub>2</sub> from Flue Gas at High Temperature Using Novel Porous Solids
Since the CO2 separation is the first and most energy intensive step of carbon capture and storage (CCS) technology, many research have targeted at improving the current technologies or developing new approaches of CO2 separation and capture. In this study, lithium orthosilicate-based pellets were d...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
AIDIC Servizi S.r.l.
2016-05-01
|
| Series: | Chemical Engineering Transactions |
| Online Access: | https://www.cetjournal.it/index.php/cet/article/view/4115 |
| _version_ | 1819297143501881344 |
|---|---|
| author | M. Puccini E. Stefanelli M. Seggiani S. Vitolo |
| author_facet | M. Puccini E. Stefanelli M. Seggiani S. Vitolo |
| author_sort | M. Puccini |
| collection | DOAJ |
| description | Since the CO2 separation is the first and most energy intensive step of carbon capture and storage (CCS) technology, many research have targeted at improving the current technologies or developing new approaches of CO2 separation and capture. In this study, lithium orthosilicate-based pellets were developed and characterized as potential regenarable high-temperature CO2 sorbents. A mechanical method was used for pelletization of the powdered materials, namely K2CO3-doped lithium silicate (Li4SiO4). For increasing the performance of the pellets over multiple cycles an activation strategy was applied: the powdered sorbents were pelletized with a binder for enhancing their porosity by applying a thermal activation before adsorption process. Different amounts of binders (layered graphite and carbon nanotubes) were added to powered doped-sorbent in order to identify the optimal amount to ensure an adequate porosity into the pellets. The CO2 sorption properties of the obtained pellets were investigated by using a thermal gravimetric analyzer (TGA) in a controlled gas flow environment at low CO2 partial pressure (0.04 atm). Compared to the pure K2CO3-doped lithium silicate pellets, the sorbents prepared using layered graphite showed greater CO2 capture capabilities, which were ascribed to the higher porosity developed as a result of the activation. At 580 °C and a CO2 partial pressure of 0.04 atm, the uptake of CO2 in pellets prepared with 20 % of graphite reached about 200 mg CO2/g sorbent within 120 minutes corresponding to a Li4SiO4-conversion of 72.1 %. During multiple sorption/desorption cycles, a decay of the sorption capacity of the pellets was observed due to a partial sintering of the materials. |
| first_indexed | 2024-12-24T05:09:19Z |
| format | Article |
| id | doaj.art-6e5687ebda5a4d4da8fde86ca27e1190 |
| institution | Directory Open Access Journal |
| issn | 2283-9216 |
| language | English |
| last_indexed | 2024-12-24T05:09:19Z |
| publishDate | 2016-05-01 |
| publisher | AIDIC Servizi S.r.l. |
| record_format | Article |
| series | Chemical Engineering Transactions |
| spelling | doaj.art-6e5687ebda5a4d4da8fde86ca27e11902022-12-21T17:13:44ZengAIDIC Servizi S.r.l.Chemical Engineering Transactions2283-92162016-05-014710.3303/CET1647024Removal of CO<sub>2</sub> from Flue Gas at High Temperature Using Novel Porous SolidsM. PucciniE. StefanelliM. SeggianiS. VitoloSince the CO2 separation is the first and most energy intensive step of carbon capture and storage (CCS) technology, many research have targeted at improving the current technologies or developing new approaches of CO2 separation and capture. In this study, lithium orthosilicate-based pellets were developed and characterized as potential regenarable high-temperature CO2 sorbents. A mechanical method was used for pelletization of the powdered materials, namely K2CO3-doped lithium silicate (Li4SiO4). For increasing the performance of the pellets over multiple cycles an activation strategy was applied: the powdered sorbents were pelletized with a binder for enhancing their porosity by applying a thermal activation before adsorption process. Different amounts of binders (layered graphite and carbon nanotubes) were added to powered doped-sorbent in order to identify the optimal amount to ensure an adequate porosity into the pellets. The CO2 sorption properties of the obtained pellets were investigated by using a thermal gravimetric analyzer (TGA) in a controlled gas flow environment at low CO2 partial pressure (0.04 atm). Compared to the pure K2CO3-doped lithium silicate pellets, the sorbents prepared using layered graphite showed greater CO2 capture capabilities, which were ascribed to the higher porosity developed as a result of the activation. At 580 °C and a CO2 partial pressure of 0.04 atm, the uptake of CO2 in pellets prepared with 20 % of graphite reached about 200 mg CO2/g sorbent within 120 minutes corresponding to a Li4SiO4-conversion of 72.1 %. During multiple sorption/desorption cycles, a decay of the sorption capacity of the pellets was observed due to a partial sintering of the materials.https://www.cetjournal.it/index.php/cet/article/view/4115 |
| spellingShingle | M. Puccini E. Stefanelli M. Seggiani S. Vitolo Removal of CO<sub>2</sub> from Flue Gas at High Temperature Using Novel Porous Solids Chemical Engineering Transactions |
| title | Removal of CO<sub>2</sub> from Flue Gas at High Temperature Using Novel Porous Solids |
| title_full | Removal of CO<sub>2</sub> from Flue Gas at High Temperature Using Novel Porous Solids |
| title_fullStr | Removal of CO<sub>2</sub> from Flue Gas at High Temperature Using Novel Porous Solids |
| title_full_unstemmed | Removal of CO<sub>2</sub> from Flue Gas at High Temperature Using Novel Porous Solids |
| title_short | Removal of CO<sub>2</sub> from Flue Gas at High Temperature Using Novel Porous Solids |
| title_sort | removal of co sub 2 sub from flue gas at high temperature using novel porous solids |
| url | https://www.cetjournal.it/index.php/cet/article/view/4115 |
| work_keys_str_mv | AT mpuccini removalofcosub2subfromfluegasathightemperatureusingnovelporoussolids AT estefanelli removalofcosub2subfromfluegasathightemperatureusingnovelporoussolids AT mseggiani removalofcosub2subfromfluegasathightemperatureusingnovelporoussolids AT svitolo removalofcosub2subfromfluegasathightemperatureusingnovelporoussolids |