| Summary: | This study presents a novel design of ultra-wideband (UWB) impedance transformers and power dividers with filtering capabilities. Based on the UWB impedance matching network, the UWB filtering impedance transformers are designed, and the UWB filtering power dividers are achieved by impedance transforming one port of one or more impedance transformers. The transformers consist of a multi-mode stepped-impedance resonator (SIR) and defected ground structures (DGSs). The SIR is tightly coupled to two ports of different impedance levels via the unsymmetrical two-sided coupled lines and DGSs. In addition, two transformers that convert impedance from 50 Ω to 100 Ω are connected to form a UWB power divider with filtering function. The 25 Ω port of an impedance transformer with a 50 Ω to 25 Ω conversion is impedance matched to two 50 Ω ports connected in parallel, resulting in another power divider with filtering function. Thus, two prototype UWB impedance transformers from 50 Ω to 100 Ω and from 50 Ω to 25 Ω are designed and their corresponding power dividers are also designed and fabricated. The simulated and measured results are consistent, demonstrating good features, such as return loss greater than 10 dB and insertion loss less than 4.5 dB in the passband, UWB filtering capacity with out-of-band rejection greater than 20 dB, and compact size smaller than 1.2λ × 2.1λ (λ is the wavelength of the central frequency).
|
|---|