Quantification of Modifiers Fading during Melt Holding in the Aluminum Casting Furnace
Strontium (Sr) and sodium (Na) are the most used modifiers in the aluminum casting industry. Both lose their concentration (fade) during holding in the melting furnace. Three types of chemical reactions in the melt may cause modifier fading: vaporizing, oxidizing, or reacting with some other element...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2023-01-01
|
| Series: | Crystals |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2073-4352/13/2/191 |
| Summary: | Strontium (Sr) and sodium (Na) are the most used modifiers in the aluminum casting industry. Both lose their concentration (fade) during holding in the melting furnace. Three types of chemical reactions in the melt may cause modifier fading: vaporizing, oxidizing, or reacting with some other elements from the melt. Due to Na and Sr’s very low vapor pressure, their vaporization from the aluminum melt was excluded as a reason for the modifiers’ fading. Oxidation looks like the major chemical reaction that causes the fading of Na and Sr from an aluminum melt. The present paper aimed to quantify the fading of Na and Sr in an Al–Si–Cu–Mg alloy. The loss of modifiers (Na and Sr) during melt holding in a furnace can be analytically quantified using equations taken from the literature. The calculated surface reaction rate constant (<i>k</i><sub>s</sub>) can estimate the modifier’s loss during melt holding in industrial and laboratory furnaces. |
|---|---|
| ISSN: | 2073-4352 |