| Summary: | From several case studies around the world, it is well known that the binder represents the major part of backfilling operation cost. Therefore, in the case of Imiter operation, research were mainly focused on the optimization of binder content. To this end, the definition of the physical and chemical properties of the future formula ingredients, specifically: tailings, waste material and hydraulic binder, was necessary. Analytical verifications were conducted to predict the UCB mechanical strength according to the defined underground functions and delivery network. Experimental testing, including: uniaxial compression, Immediate Bearing Index (IBI) and slump test, were then conducted to evaluate the possibility of reaching the required strength with the selected materials. The obtained results show that the tailings and mining wastes can be used as backfilling material with a specific binder content depending on each underground application. The followed approach can be applied for a prefeasibility evaluation for a backfilling facility.
|
|---|