Statistical Analysis of Properties of Technological Charge and Manufacturing Tolerance of Thin-Walled Sections in Process of Multi-Workstations Roller Bending
The studied collecting electrodes for electrostatic precipitators are cold-rolled formed. Here Sigma 750 open section was manufactured of DC01 steel grade. Length of the electrodes ranged from 8 to 13 meters, all were thin-walled of 1.5 mm. Tolerance of their manufacture is strictly set. A database...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Polish Academy of Sciences
2023-06-01
|
| Series: | Archives of Metallurgy and Materials |
| Subjects: | |
| Online Access: | https://journals.pan.pl/Content/127412/PDF/AMM-2023-2-39-Waclawiak.pdf |
| Summary: | The studied collecting electrodes for electrostatic precipitators are cold-rolled formed. Here Sigma 750 open section was manufactured of DC01 steel grade. Length of the electrodes ranged from 8 to 13 meters, all were thin-walled of 1.5 mm. Tolerance of their manufacture is strictly set. A database of material properties, chemical composition, and a set of final tolerance of manufactured profiles has been collected. At first basic statistics for the data has been done. Finally statistical relation between the material composition and profile geometrical tolerance has been studied, next between the material mechanical properties and profile geometrical tolerance has been examined. |
|---|---|
| ISSN: | 2300-1909 |