| Summary: | Low-voltage AC power lines are prone to arc faults, and an arc current presents as a random and complicated signal. The amplitude of the line current remains relatively unchanged during the occurrence of series arcs, hence complicating the detection of series arc faults. In this work, we developed a low-voltage series arc fault test platform to analyze the digital features of low-voltage series arc currents and the morphology of arc combustion, as the current model fails to capture the high-frequency and randomness of arc currents. An analysis of the physical causes and influencing factors of the random distribution of AC arc zero-crossing times was conducted. A time-domain simulation model for arc fault currents was developed by enhancing the time constant of the Cassie arc model, while the high-frequency features of arc currents were simulated using a segmented noise model. The measured arc current data were utilized to validate the model through the analysis of the zero-crossing time distribution of arc current, the correlation coefficient of the arc current frequency-domain signal, and the similarity of the time-domain waveforms. When comparing the similarity of the simulated waveforms of the arc model presented in this research and those of other traditional arc models, it was found that the suggested model effectively characterizes the time-/frequency-domain features of low-voltage AC series arc fault currents. The suggested model enhances the features of randomness in low-voltage AC series arc faults and is important in extracting essential aspects and reliably recognizing low-voltage series arc faults.
|
|---|