The Mechanical Response of a Silty Sand Stabilized with Colloidal Silica
This paper presents a laboratory investigation into the mechanical response of a silty sand, with a fines content of 10%, stabilized with colloidal silica (CS). To this end, a series of unconfined compression tests as well as monotonic and cyclic triaxial tests was performed on a silty sand, compris...
Main Authors: | Antigoni Vranna, Theodora Tika |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2021-09-01
|
Series: | Geotechnics |
Subjects: | |
Online Access: | https://www.mdpi.com/2673-7094/1/2/13 |
Similar Items
-
Injectability of colloidal nano-silica in Bushehr carbonate sand with different silt content
by: E. Azini, et al.
Published: (2023-05-01) -
Permeation grouting of low-permeability silty sands with colloidal silica
by: Gang Liu, et al.
Published: (2023-12-01) -
Stabilization of Fluidic Silty Sands with Cement and Steel Slag
by: Leilei Gu, et al.
Published: (2023-10-01) -
Effect of Silica Fume Addition on the Behavior of Silty-Clayey Soils
by: Adel A. Al-Azzawi, et al.
Published: (2012-03-01) -
Effects of Colloidal Silica Grouting on Geotechnical Properties of Liquefiable Soils: A Review
by: Giovanni Ciardi, et al.
Published: (2021-11-01)