Aplikasi Desain Faktorial 23 pada Kadar CO2 Proses Purifikasi Bio-gas dengan Adsorben Genteng - Zeolite
The CO2 content in biogas is an impurity, so it needs to be reduced. One way to reduce the levels of CO2 in biogas is by purification with tile-zeolite adsorbents. The purpose of this study was to determine the use of tile - zeolite as an adsorbent in the purification process to reduce CO2 levels us...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
University of Brawijaya
2020-12-01
|
| Series: | Rekayasa Mesin |
| Subjects: | |
| Online Access: | https://rekayasamesin.ub.ac.id/index.php/rm/article/view/727 |
| Summary: | The CO2 content in biogas is an impurity, so it needs to be reduced. One way to reduce the levels of CO2 in biogas is by purification with tile-zeolite adsorbents. The purpose of this study was to determine the use of tile - zeolite as an adsorbent in the purification process to reduce CO2 levels using a 23 factorial design. The use of tile powder adsorbents (25% and 75%) - Zeolite (75% and 25%), biogas flow rates of 1 and 6 liters/minute, which were investigated at intervals of 5 and 20 minutes, to collect CO2 content data. Gas Chromatography-Mass Spectrometry (GCMS) is used to test the adsorption gas content. The results are shown by the Pareto curve resulting from biogas purification of CO2 levels, each of which has a magnitude of response to CO2 levels. Increased levels of tile-zeolite as an adsorbent and the rate of biogas flow in the purification process had an effect of reducing CO2 levels by 44.214%. Conversely, an increase in tile-zeolite levels as an adsorbent increases CO2 levels in the biogas purification process. Natural tile is a porous material that can adsorb and has ions that can be exchanged with ions from the outside. |
|---|---|
| ISSN: | 2338-1663 2477-6041 |