AVALIAÇÃO DA SUPERFÍCIE DA MADEIRA DE Eucalyptus grandis Hill ex Maiden TRATADA TERMICAMENTE
The objective of this study was to study the machined surface quality of Eucalyptus grandis wood submitted to heat treatment. The machining operations realized on the boards obtained from the processing of six trees were: planing, thicknessing, tear in horizontal drilling, drilling, drilling hinge a...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | Portuguese |
| Published: |
Universidade Federal de Santa Maria
2015-01-01
|
| Series: | Ciência Florestal |
| Online Access: | http://www.redalyc.org/articulo.oa?id=53438248014 |
| Summary: | The objective of this study was to study the machined surface quality of Eucalyptus grandis wood submitted to heat treatment. The machining operations realized on the boards obtained from the processing of six trees were: planing, thicknessing, tear in horizontal drilling, drilling, drilling hinge and sanding. 208 boards of 125 x 25 x 500 mm were selected, with 104 untreated and 104 heat-treated boards at maximum temperature of 190ºC. The evaluation of the surface was performed according to ASTM D-1666/87 standard. The result showed that the Eucalyptus grandis wood presents a good behavior during the machining tests, obtaining notes 1 and 2 (excellent and good), except for drilling hinge test in the bolt hole and drilling with 12, 8, 6 mm, reaching notes between 2 and 4 (good, regular and bad). The heat treatment reduced the number of defects on the machined samples, except for torn grain in some machining operations. |
|---|---|
| ISSN: | 0103-9954 1980-5098 |